Operating Tips; Switching Off The Appliance; Setting The Temperature; Cool-Fresh Compartment Storage Setting - Thermador T36BT110NS Use And Care Manual

en-us Basic Operation
8.2 Operating tips
Once you have switched on the appliance, the set
¡
temperature is only reached after several hours.
Do not put any food in the appliance until the set
temperature has been reached.
The front and side panels of the housing heat up
¡
occasionally. This prevents condensation from forming.
When you close the door, a vacuum may be created.
¡
The door is then difficult to open again. Wait a moment
until the vacuum is offset.
The temperature in the appliance varies due to the
¡
following conditions:
– How often the appliance is opened
– Load capacity
– Temperature of newly stored food
– Ambient temperature
– Direct sunlight
8.3 Switching off the appliance
Switch off the appliance at the main switch.
▶
→ "Appliance", Fig.
1
8.4 Setting the temperature
Setting the refrigerator compartment temperature
Touch the temperature display (refrigerator
1.
compartment).
Touch ⁠ / repeatedly until the temperature display
2.
(refrigerator compartment) shows the desired
temperature setting.
Tip: When you press and hold
changes by 1° per second until you release it.
The recommended temperature in the refrigerator
compartment is 37 °F (3 °C).
Setting the recommended refrigerator compartment
temperature
Touch the temperature display (refrigerator
1.
compartment).
Touch "Set to Default" ⁠ .
2.
The refrigerator compartment temperature is set to
a
37 °F (3 °C).
Setting the freezer compartment temperature
Touch the temperature display (freezer compartment).
1.
Touch ⁠ / repeatedly until the temperature display
2.
(freezer compartment) shows the desired temperature
setting.
Tip: When you press and hold
changes by 1° per second until you release it.
The recommended temperature in the freezer
compartment is 0 °F (−18 °C).
Setting the recommended freezer compartment
temperature
Touch the temperature display (freezer compartment).
1.
14
, Page 10
/ 11
⁠ / , the temperature
⁠ / , the temperature
Touch "Set to Default" ⁠ .
2.
The freezer compartment temperature is set to 0 °F
a
(−18 °C).
8.5 Cool-fresh compartment storage setting
You can set the temperature and humidity of the cool-
fresh compartment using predefined storage settings.
Tip: Further settings are available in the
Home Connect® app.
Setting the cool-fresh compartment storage setting
Touch the required cool-fresh compartment storage
1.
setting.
Touch "More Options"
2.
Touch the required storage setting and confirm using
3.
⁠ .
8.6 Keylock
The button lock prevents the appliance from being
operated accidentally or incorrectly while running.
Note: You can permanently activate or deactivate the
automatic button lock. → Page 15
Switching on the button lock
Press and hold for 3 seconds.
▶
lights up.
a
Switching off the button lock
Press and hold for 3 seconds.
▶
8.7 Storage setting in the variable-
temperature compartment
You can set the temperature of the variable-temperature
compartment using predefined storage settings on the
control panel or on the control panel (variable-temperature
compartment).
Tip: Further settings are available in the
Home Connect® app.
Setting the variable-temperature compartment
Touch the storage setting for the variable-temperature
1.
compartment.
Touch "More Options"
2.
Touch the required storage setting and confirm using
3.
⁠ .
Setting the control panel (variable-temperature
compartment)
In the control panel (variable-temperature
1.
compartment), touch and hold ⁠ Unlock until the light
bar lights up fully.
Touch the storage setting that you desire.
2.
⁠ .
⁠ .