Advertisement
4
5
1
TIMER OPERATION
This water-resistant digital cooking timer provides both
countup and countdown features in hours, minutes and
seconds.
To set the time to countdown:
•
Press the Start/Stop:
backlight.
Press the HR button (1) to set the number of hours. Hold
•
the button down to fast-forward digits (maximum setting:
99 hours) (4).
•
Press the MIN button (2) to set the number of minutes.
Hold the button down to fast-forward digits (maximum
setting: 59 minutes) (5).
•
When the time is set, press the Start/Stop:
(3) to start the countdown.
•
When the time is up, the alarm will sound for 30 seconds
and automatically restart countdown from previous time
setting.
IMPORTANT
When the timer has over an hour left on the
countdown, H and M (Hours and Minutes) will flash
on and off; numbers will count down every minute.
When the timer has less than an hour of time left, H
and M turn to M and S (Minutes and Seconds) and the
seconds count down; numbers will start to count down
every second.
To clear the time:
•
Press the Start/Stop:
backlight.
•
Press the HR and MIN:
To set the time to countup:
•
Press the Start/Stop:
backlight.
•
Press the Start/Stop:
countup. While counting up, display will show the reading
in hour/minute and minute/second formats.
button to turn on the
button to turn on the
buttons simultaneously (1)(2).
button to turn on the
button again to start
2
3
7
•
Press the Start/Stop:
The countup will stop after 99 hours (4), 59 minutes (5).
Automatic shut-off:
•
To save battery life, the backlight turns off after 10
seconds. The timer will turn completely off after 10
minutes of inactivity.
NOTE: If using the timer in an environment that subjects it to
electrostatic discharge (static electricity) the time setting may be
lost. If this happens, reset the timer.
Battery installation:
•
Use a Phillips screwdriver to unlock the battery
compartment on the back of the timer (6) by turning the
button
screw clockwise.
•
Remove the battery cover from the back of the timer (7).
•
Add or replace the AAA batteries (8).
•
Replace the battery cover.
•
Lock the battery cover by turning the screw anticlockwise
with a Phillips screwdriver.
•
After the batteries are installed, (
LCD screen.
Maintenance:
•
Do not clean the timer with an abrasive or corrosive
compound. Doing so may scratch it or corrode the
electronic circuits.
•
Do not subject the timer to excessive force, shock, dust or
expose it to excessive temperatures or humidity. Doing so
may result in its malfunction, shorter electronic lifespan,
battery damage or distorted parts.
•
Do not tamper with the internal components of the timer.
Doing so will invalidate the timer's warranty and may
cause unnecessary damage to the battery and internal
parts.
•
Do not subject the timer to excessive exposure to direct
sunlight or heavy rain.
•
Do not immerse the timer in water.
For best performance, it is recommended to
bring the timer indoors when not in use.
6
8
button twice to stop timer.
00
00) will display on the
WWW.WEBER.COM
19
Advertisement
