Operation; Pairing A Bluetooth® Device - ION AQUABOOM X User Manual

OPERATION

Pairing a Bluetooth® Device
1 - PRESS FOR 2 SECONDS
1. Turn on your Bluetooth device.
2. Turn on Aquaboom™ X by holding down the Power button for 2 seconds. When the unit is
first turned on, it will automatically enter Bluetooth pairing mode. If necessary, press the
Bluetooth button to select Bluetooth mode.
3. Navigate to your device's Bluetooth setup screen, find AQUABOOM X, and connect. if voice
prompts are enabled, you will hear "Bluetooth Connected". If after 90 seconds if there is no
connection, the speaker will stop searching for a Bluetooth device and enter AUX mode.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
To disconnect a paired device, do any of the following:
• Turn o Bluetooth from your device's Bluetooth settings. The speaker will enter
Bluetooth pairing mode to make it available for another device.
• Press the Bluetooth button to disconnect and re-enter pairing mode.
Once you have disconnected, you will hear "Bluetooth Disconnected" if voice prompts are
enabled.
Tip: Double press the Power button to turn voice prompts on or o .
ION Audio Aquaboom™ X User Guide
AQUABOOM X
2
9