Playing Back Recordings - Panasonic Quasar Palmcorder VM-L451 Operating Instructions Manual

Playing Back Recordings
Before you begin...
• Connect Camcorder to power source.
• Insert recorded tape.
I Auto Tracking [
Continuously analyzes each recording for
optimum picture quality.
1 Manual Tracking |
Some recordings require manual
adjustment to reduce noise.
Press UP
A
or DOWN
T until Playback
picture clears up.
Press DISPLAY
to return to Auto Tracking.
Press LCD-OPEN
and swing LCD
monitor fully open.
• If you want to playback on EVF, close
and lock LCD monitor.
2 Set POWER to VCR.
Power Lamp lights.
• If tape has no record tab, auto
playback begins.
• EVF or LCD monitor turns on/off by
the POWER switch.
• EVF shuts off when LCD monitor is
opened and turns back on when LCD
is closed.
3 Playback function buttons.
•
QREW
: Rewind tape.
(5PLAY :
Play tape.
©STOP
: Stop tape.
©BRIGHT
: Adjust LCD monitor
brightness.
©VOLUME
: Adjust volume of speaker.
Press "T" : Volume
up (+).
Press "W": Volume
down (-).
Note:
• Using LCD monitor reduces battery
operating time.
• Return LCD monitor to locked position
when not in use.
1
VOLUME [-]HII-[♦)
1 Quick Visual Search t
Search Speed
• SP (Standard Play) : 3 times normal.
• SLP (Super Long Play): 9 times normal.
During playback, press:
• FF : fast forward search
• REW : rewind search
Press again or press PLAY for normal play.
I Still Picture I
Press STILL
to freeze picture.
Press again
for normal play.
This feature works best in SLP mode (page 10).
Note:
• During search, horizontal noise bars will appear.
Audio is muted.
•To protect video heads and tape, operating
modes will revert as follows after 5 minutes:
Still-► Stand-by
Stand-by-*- Power off (when Battery Pack is
used).
• Tape auto-rewinds if played or fast forwarded to end.
17