Connect Sw700M To Your Home Wi-Fi Network; Option 1: Set Up Through An Ios Device - Philips SW700M/79 User Manual

4 Connect
SW700M to
your home Wi-
Fi network
To connect SW700M to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi settings to SW700M in one of the
following ways (depending on the type of your
smart device and whether your Wi-Fi router is
WPS enabled):
Devices Setup method
required
for speaker
setup
iOS device Choose option 1 (see 'Option
+ Wi-Fi 1: Set up through an iOS device'
router on page 8).
Android Choose option 2 (see 'Option
device 2: Set up through an Android
+ Wi-Fi device' on page 9).
router
WPS Wi-Fi Choose option 3 (see 'Option
router 3: Set up wireless connection to
a WPS router directly' on page
10).
PC/Mac Choose option 4 (see 'Option
with Wi-Fi 4: Set up through a PC/Mac
enabled (advanced)' on page 11).
+ Wi-Fi
router
Before connection of SW700M to your home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b the speaker has been powered on and
booted up successfully.
c (for option 1, 2 and 4 only) you have
jotted down your Wi-Fi password.
EN
8
* If your Wi-Fi password contains such special
characters as #/:/;/', you need to change your
password.
Once connected successfully, SW700M will
remember your home Wi-Fi settings. Whenever
SW700M is powered on, it is connected to
your home Wi-Fi network automatically. Then
you can enjoy Spotify music services via the
Spotify app.
Option 1: Set up through an
iOS device
1
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
2
As instructed on the app, press and hold
SETUP on the back of SW700M for more
than 3 seconds.
» Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the SETUP button turns
solid amber.