Table of Contents
Advertisement
en Troubleshooting
16.4 Regenerating self-cleaning surfaces in
the cooking compartment
The ceiling in the cooking compartment is self-cleaning.
The self-cleaning surfaces are coated with a porous,
matt ceramic layer and have a rough surface. When
the grill function is in operation, the self-cleaning sur-
faces absorb splashes from roasting or grilling and
break down the grease residues. If you are primarily
using the microwave function, start the grill function at
regular intervals to clean the ceiling.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
Do not use oven cleaner on the self-cleaning sur-
▶
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
Requirements
¡ The cooking compartment is empty.
¡ The appliance is switched on.
Press "Grill".
1.
Press "Level".
2.
Select the highest grill setting.
3.
Press "Apply".
4.
Press "Cooking time".
5.
Set the required cooking time.
6.
The cleaning time depends on the amount of grease
residues. Start with a duration of 20 minutes.
Press "Apply".
7.
Press
to start the operation.
8.
Ventilate the room while the appliance is heating.
a Smoke can build up during operation. This is normal
and reduces.
a An audible signal sounds once the cooking time
has elapsed.
If smoke is still visible at the end of the duration, in-
9.
crease the duration.
16.5 Cleaning the accessories
Read the information on cleaning products.
1.
Soften baked-on food remnants with a damp dish
2.
cloth and hot soapy water.
3.
Clean the accessory with hot soapy water and a soft
dish cloth or a scrubbing brush.
Clean the wire rack with stainless steel cleaner or in
4.
the dishwasher.
Use steel wool or oven cleaner to remove very
heavy soiling.
5.
Dry with a soft cloth.
16.6 Cleaning the door panels
ATTENTION!
Incorrect cleaning may damage the door panes.
Do not use a glass scraper.
▶
Troubleshooting
17 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
18
Read the information on cleaning products.
1.
Clean the door panels with a soft dish cloth and
2.
glass cleaner.
Note: Shadows on the door panels, which look like
streaks, are caused by reflections made by the in-
terior lighting.
Dry with a soft cloth.
3.
16.7 Cleaning the door seal
ATTENTION!
Incorrect cleaning may damage the door seal.
Do not use metal scrapers or glass scrapers for
▶
cleaning.
Do not use abrasive cleaning agents.
▶
Read the information on cleaning products.
1.
Clean the door seal with hot soapy water and a soft
2.
dish cloth.
Dry with a soft cloth.
3.
16.8 Cleaning the front of the appliance
ATTENTION!
Incorrect cleaning may damage the front of the appli-
ance.
Do not use glass cleaner, metal scrapers or glass
▶
scrapers for cleaning.
To prevent corrosion on stainless steel fronts, re-
▶
move any limescale, grease, starch and albumin
(e.g. egg white) stains immediately.
On stainless steel surfaces, use special stainless
▶
steel cleaning products suitable for hot surfaces.
Read the information on cleaning products.
1.
Clean the front of the appliance using hot soapy wa-
2.
ter and a dish cloth.
Note: Slight differences in colour on the front of the
appliance are caused by the use of different materi-
als, such as glass, plastic and metal.
For stainless steel appliance fronts, apply a thin
3.
layer of the stainless steel cleaning product with a
soft cloth.
You can obtain the stainless steel cleaning products
from the after-sales service or the online shop.
Dry with a soft cloth.
4.
16.9 Cleaning the control panel
ATTENTION!
Incorrect cleaning may damage the control panel.
Never wipe the control panel with a wet cloth.
▶
Read the information on cleaning products.
1.
Clean the control panel using a microfibre cloth or a
2.
soft, damp cloth.
Dry with a soft cloth.
3.
Advertisement
Table of Contents
