At The End Of The Day; Daily Maintenance; General; Every Day - Electrolux WB6-50 User Manual

Table of Contents

Advertisement

28
sluice program. Therefore it is recommended to add a sluice step to a "normal" program via the option menu when re-
quired as opposed to using a sluice program alone.
The machine is now ready for launching a new washing cycle.

11.2 At the end of the day

Leave the door open when ready. This is to prevent that moisture stays in the machine and develop bacteria and
mould.

12 Daily maintenance

12.1 General

It is the responsibility of the owner of the machine/the laundry manager to make sure that the following maintenance
is performed.
Note!
Lack of maintenance may deteriorate the performance of the machine and may cause damage to
components.
Note!
This is recommended time intervals. Depending on the use of the machine other intervals may be necessary.

12.2 Every day

Check that the "emergency stop button" works properly.
Check that the opening safety devices of the drum doors and of the outer doors are working correctly.
Check that the door is locked during a program. Make sure the door cannot be opened until after the program is
complete.
If the door can be opened before program end, the machine must be placed out of order until repairs are made.
Check that the door does not leak.
Clean the door, door glass and door gasket.
Clean the external parts.
Do not clean the washer with bleach or oxygenated water to avoid damaging the logos and the control panel of
the machine.
We recommend you to use ECOLAB product to clean the washer.

12.3 Detergent container

Rinse the inside, every days with water, the detergents container.
Clean the detergent container at regular basis to avoid that it is being clogged by detergent residue.
Clean the detergent container and siphons with hot water and for example a small brush.

12.4 Descaling

When descaling is needed:
Use the special machine cleaning program. If it is not available, contact authorized service personnel to get access
to the program.
It is also possible to use a program with high temperature , 95 °C, for descaling. Add a descaling agent, for example
citric acid.

12.5 Maintenance to be carried out by qualified service personnel

Contact qualified service personnel to perform the following maintenance:
Once a year
User manual
Warning
Important

Advertisement

Table of Contents
loading

Table of Contents