Table of Contents
Advertisement
en humidClean
Basic settings
Language
Time
Date
Display
Brightness
"Time", standby mode
"Time", display
Adjustment
Factory setting (may vary according to model)
1
Sound
Button tone
Signal tone
Factory setting (may vary according to model)
1
Appliance settings
Illumination
Microwave output selec-
tion
1
Factory setting (may vary according to model)
humidClean
12 humidClean
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by evaporating the soapy water. It is then
easier to remove the dirt.
ATTENTION!
Incorrect cleaning may damage the appliance.
Never pour liquid into the cooking compartment.
▶
Cleaning and servicing
13 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
14
Selection
See selection on the ap-
pliance
"Time" in 24-hour format
"Date" in the format
DD.MM.YYYY
Selection
1
¡ Settings 1 to 8
¡ On (this setting in-
creases energy con-
sumption)
¡ displayed, for set time
¡ Off
1
¡ Digital + date
¡ Digital
¡ Analog
¡ Align the display hori-
zontally and vertically.
Selection
1
¡ On
¡ Off
¡ Very short
¡ Short duration
1
¡ Medium duration
¡ Long duration
Selection
1
¡ On
¡ Off
¡ 90 W
¡ 180 W
¡ 360W
¡ 600 W
¡ boost
Customisation
Brand logo
Operation after switch-on
Childproof lock
1
Factory setting (may vary according to model)
Factory settings
Factory settings
1
Appliance information
11.2 Changing the basic settings
Requirement: The appliance is switched on.
Press "Basic settings".
1.
Press the required basic setting.
2.
Change the required settings on the display.
3.
Use
to return to the overview or go back to the
4.
main menu.
11.3 Changing the time
You can change the time in the basic settings.
Requirement: The appliance is switched on.
1.
Press "Basic settings".
Press the "Time" basic setting.
2.
a The display shows the set value. The hours flash.
Use
and
3.
Press the minutes.
4.
Use
and
5.
Press "Apply".
6.
Use
to return to the overview or go back to the
7.
main menu.
12.1 Setting the cleaning aid
Requirement: The appliance is switched on.
Press "humidClean".
1.
Follow the instructions on the display.
2.
Press "Apply".
3.
Press
.
4.
a A signal tone sounds once the time has elapsed.
Follow the instructions on the display.
5.
13.1 Cleaning products
Only use suitable cleaning agents.
Selection
1
¡ Display
¡ Don't display
¡ Main menu
¡ Microwave
¡ Meals
¡ Available
¡ Deactivated
Selection
¡ Restore
¡ Cancel
¡ Displaying "Appliance
information"
to set the hours.
to set the minutes.
1
Advertisement
Table of Contents
