Table of Contents
Advertisement
XR-P360, XR-P360G
|
9. PANEL FACILITIES
RECEIVER
®
Remote sensor
DOS
This illustration shows the XR-P360 G.
RECEIVER
@® MONO button (SD, SL)
MONO/MPX button (S/DF)
Turn this button on before using sound multiplexation
software when the KARAOKE function is being used.
@ CLOCK/CLOCK ADJ button
@ FREQ/STATION button
Each time this button is pressed, the mode changes between
FREQUENCY and STATION.
@® Volume contro! (VOLUME)
@© MIC level control
© Microphone jack
@ AUX/CD It button ( SD, SL)
MD/CD Hl button (S/DF)
® Tuning/station call ( <<), (>) buttons
@ FM button
@ AM button
(i) POWER STANDBY/ON Switch
{2 STANDBY indicator
This is the switch for electric power.
ON:
When set to the ON position, power is supplied
and the unit becomes operational.
When set to the STANDBY position, the main
power flow is cut and the unit is no longer fully
operational.
A minute flow of power feeds
the unit to maintain operation readiness (the
STANDBY indicator lights).
STANDBY:
© Display
72
@ SURROUND & ST. WIDE button
Each time this button is pressed, the mode changes in the
following sequence:
p>
ST. WIDE 1 —-———»_
ST. WIDE 2
off
<
® P.BASS (DEMO) button
Each time this button is pressed, the mode changes in the
following sequence:
> P.BASS 1
we
P.BASS 2
off
~<
(@® MEMORY (PEEP) button
In the STANDBY mode, each time this button is pressed,
the operation signal is turned on or off as follows:
*
Signal on
Signal off <—_----—-
@
The operation signal beeps whenever any button is pressed
so as to let you know the button has been pushed for sure.
@ SFC/KARAOKE button
Each time this button is pressed, the mode changes in the
following sequence:
> DISCO
>
HALL
>
MOVIE
_———____.
off
| +.
KARAOKE
«——_!
@® TIMER REC/WAKE-UP button
Advertisement
Table of Contents
