Table of Contents
Advertisement
User programmes
You can create and save up to 20 of
your own programmes.
- You can combine up to 9 cooking
stages to accurately programme your
favourite or most frequently used re-
cipes. In each cooking stage, you can
select settings such as the function,
temperature and cooking duration.
- You can enter the name of the pro-
gramme for your recipe.
When you call up and start your pro-
gramme again, it will run automatically.
There are different ways of creating a
user programme:
- At the end of an automatic pro-
gramme or special application, save it
as a user programme.
- Save a cooking programme after run-
ning it with a set cooking duration.
Then enter a programme name.
Creating user programmes
Select
User programmes
Select
Create programme
You can now specify the settings for the
first cooking stage.
Follow the instructions in the display:
Select and confirm the settings you
want.
If you select the
to add another cooking stage
Add
where you set a cooking duration. Only
then can you save or start the pro-
gramme.
All settings for the first cooking stage
have now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
124
.
.
function, use
Pre-heat
If additional cooking stages are re-
quired, select
Add
the first cooking stage.
If you want to check the settings or to
change them at a later stage, touch the
cooking stage in question.
When you have finished setting all the
cooking stages, select
Enter the programme name using the
keyboard.
You can add a line break for longer pro-
gramme names using the symbol.
Once you have entered the pro-
gramme name, select
A message will appear in the display
confirming that the programme name
has been saved.
Confirm with OK.
You can start the saved programme im-
mediately, delay the start or change the
cooking stages.
and proceed as for
.
Save
.
Save
Advertisement
Table of Contents
