Care & Cleaning; Storage Guide - FoodSaver VS3130 Owner's Manual

Care & Cleaning
of your Vacuum Sealer
To Clean Appliance:
CAUTION: Remove Power Cord from electrical outlet. Do not immerse in
liquid.
Check Gaskets and around Drip Tray to make sure they are free from
food materials. Wipe off Gasket with warm soapy cloth if needed
. Upper and Lower Gaskets may be removed for cleaning. Clean
A
with warm, soapy water and allow gaskets to dry before reinserting in
machine.
The Removable Drip Tray makes cleanup easy when small amounts of
liquids are pulled into Vacuum Channel during vacuum process.
Empty Drip Tray after each use. Wash in warm soapy water or place
in top rack of dishwasher. Check for food residues in Drip Tray Slot.
Clean if needed. Dry thoroughly before reinserting into appliance.
To Clean Built-in Handheld Sealer Reservoir:
Empty Reservoir after each use. To remove Reservoir from Handheld
Sealer, holding top portion (black upper piece) firmly, pull Lower
Reservoir down and off . Wash in warm soapy water. Air dry before
B
replacing.
NOTE: Always clean after each use when fluid is visible.
11 US: www.FoodSaver.com | CA: www.FoodSaver.ca | MX: www.oster.com.mx/foodsaver
VS3000_22EFSM1.indd 11-12 VS3000_22EFSM1.indd 11-12

Storage Guide

of your Vacuum Sealer
A
To Store Appliance:
Clean unit thoroughly as detailed in "Care & Cleaning" section.
After unit has been cleaned and allowed to fully dry, close lid and
push Latch into Store (middle) position
closed but prevents any undue pressure from being applied to internal
sealing Gaskets of unit.
Always leave Latch in Store position when not in use. Never store Lid
in Operate position as Gaskets may become compressed and unit will
not vacuum bag.
Lift Drip Tray out
B
Pull Reservoir off
Consumer Service: US: 1-877-777-8042 CA: 1-877-804-5383 MX: +52 55 5366 0800
A
. This setting will keep lid
A
Push Latch into Store position
when not in use.
12
2022/1/25 上午11:41 2022/1/25 上午11:41