Miele HS19 Operating Instructions Manual page 111

en-US - IMPORTANT SAFETY INSTRUCTIONS
Technical safety
The vacuum cleaner operates at 25.2 V.

It is classified as a class II
class III appliance in its construction.
This appliance is supplied by a safety extra-low voltage
(SELV) power source where the voltage is low enough to
protect users from the risk of electrical shock. A Class II
charger is used for supplying power to charge the vacuum
cleaner.
Compare the connection data on the data plate of the

charger (voltage and frequency) with that of the electricity
supply. This data must match exactly. Without modifica-
tions, the charger is suitable for 50 Hz and 60 Hz.
The electrical outlet must be rated at 15 Amps.

Check both the vacuum cleaner and all accessories sup-

plied with it for any visible signs of damage before use. Do
not use a damaged vacuum cleaner or damaged accessory.
The Miele Multi Floor XXL Electrobrush (included as

standard) and the Miele Electro Compact handheld brush
(optional accessory) are additional motor-driven devices
designed specially for this Miele vacuum cleaner. For safety
reasons, the vacuum cleaner must not be used with a dif-
ferent Miele Electrobrush/handheld brush or an Electro-
brush/handheld brush produced by another manufacturer.
Before and during use, make sure that no coarse dirt or

debris is/gets trapped in the bottom of the Multi Floor XXL
Electrobrush (included as standard) or in the bottom of the
Electro Compact handheld brush (optional accessory).
Store the vacuum cleaner and all accessories at an ambi-

ent temperature between 32°F and 113°F (0°C and 45°C).
appliance and is designed as a
111