Table of Contents
Advertisement
Motion Test
Your trail camera is equipped with a MOTION TEST
feature. This feature helps you aim the camera at your
target area. With the motion test turned on, simply walk
around in your target area. When your presence is
detected, a red LED on the front of the camera will flash.
Simply press the OK button, the red LED will flash when
motion is detected.
Make sure you turn OFF the MOTION TEST function
before leaving the camera in the field by pressing the
OK button to stop the test.
Camera Name
You can add a custom name for your camera if needed.
To name your camera, Press the OK button once. This
will highlight the first character in the camera name. Use
the UP and DOWN arrows to change the field. Press the
RIGHT ARROW button to move to the next letter. Your
available characters are Capital A-Z, 0-9 or a blank
space. When finished, press the OK button to save your
selection.
13
Advertisement
Table of Contents
