Table of Contents
Advertisement
SPECIFICATIONS
Volts ........................................................... 18 V DC
Battery Type ................................................. M18™
Charger Type ................................................ M18™
Weight .........................................
Recommended Ambient
Operating Temperature .................... -17°C to 51°C
Cat. No. ............................ M18 ONEFMTIW2FC12
Anvil Type ..................................
RPM............................................................ 0-2,400
IPM ............................................................. 0-3,000
Cat. No. ............................ M18 ONEFMTIW2PC12
Anvil Type .......................................
RPM............................................................ 0-2,400
IPM..............................................................
Recommended
Lanyard............ MILWAUKEE
FUNCTIONAL DESCRIPTION
1
8
7
6
5
1. 1/2" friction ring (M18 ONEFMTIW2FC12)
2. LED performance indicator
3. Handle
4. Lanyard loop (M18 ONEFMTIW2PC12)
5. Drive control button
6. Trigger
7. Direction control switch
8. Tri-LEDs
9. 1/2" pin detent (M18 ONEFMTIW2PC12)
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For
specific
charging
operator's manual supplied with your charger
and battery.
Inserting/Removing the Battery
To insert the battery, slide the pack into the body of
the tool. Make sure it latches securely into place.
Only
WARNING
specifically recommended for
this tool. Others may be hazardous.
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
Always remove the battery pack
WARNING
any time the tool is not in use.
1.8 kg (Tool-only)
1/2" Friction Ring
1/2" Pin Detent
Energy Absorbing
®
2
9
3
4
instructions,
read
use
accessories
Attaching and Removing Accessories
1/2" Impact Wrench with Friction Ring
(Cat. No. M18 ONEFMTIW2FC12)
1.
WARNING
2. Use only the appropriate size Square Drive
Sockets.
3. To attach a socket, align the accessory with the
anvil and push it firmly over the retaining ring.
4. To remove the accessory, pull the accessory off
the anvil.
1/2" Impact Wrench with Pin Detent
(Cat. No. M18 ONEFMTIW2PC12)
1.
WARNING
0-3,000
2. Use only the appropriate size Square Drive
Sockets.
3. To attach a socket, align the hole in the
accessory with the detent pin on the anvil. Hold
the detent pin in while pushing the socket onto
the anvil. The detent pin will snap into place in
the hole to secure the socket.
4. To remove the socket, insert a nail or other thin
object into the hole in the accessory and press in
the detent pin. Pull the accessory off the anvil.
To learn more about the ONE-KEY™ functionality
for this tool, go to milwaukeetool.com/One-Key. To
download the ONE-KEY™ app, visit the App Store or
Google Play from your smart device.
Solid Blue
Blinking Blue
Blinking Red
WARNING
protection marked to comply with AS/NZS 1337.1.
The drive control button is used to adjust the torque,
rotation speed (RPM), and impact speed (IPM) for
the application.
To select the drive control mode:
1. Pull
and
the
trigger to turn on the tool.
The
indicator is lit.
2.
Press the drive control
button
the
wireless
default settings via the
ONE-KEY™ App on your smart device. When
the desired mode indicator is lit, begin work.
NOTE: Select the torque range in accordance
with the equipment manufacturers fastening
instructions. For precision applications, confirm
the final tightening torque with a calibrated
device.
4
Remove battery to avoid starting
the tool.
Remove battery to avoid starting
the tool.
ONE-KEY™
ONE-KEY™ Indicator
Wireless mode is active and ready
to
be
configured
ONE-KEY™ app.
Tool is actively communicating with
the ONE-KEY™ app.
Tool is in security lockout and can
be unlocked by the owner via the
ONE-KEY™ app.
OPERATION
To reduce the risk of injury,
always
wear
Using the Drive Control
release
the
Drive Control Button
current
mode
to cycle through
modes.
Select
to change the
via
the
proper
eye
Mode Indicator
Advertisement
Table of Contents
