Table of Contents
Advertisement
OPERATION
6
7
POWER SWITCH
Position
I
O
PTO
POWER TAKE-OFF (PTO) OPERATION
Avoid overloading of the PTO outlet, ensure the tool is
not rated over 900W
Avoid underload, PTO outlet will not work with load
under 100W
The moment you switch on the power tool, the vacuum
cleaner will also switch on. Once the electrical appliance
has been switched off, the vacuum cleaner switches off
following a time lapse (around 5 seconds) to allow the
suction tube to be emptied.
OVERLOAD PROTECTION
When the connected tool has a higher rating than
900W, it will activate the overload safety system and cut
power to the take off electrical outlet.
Switch off and disconnect the connected tool. Press the
'Overload Reset' button to restore Power Take Off.
The overload safety system can also be activated in
situations where the connected tool is under extreme
load or stalled during operation.
Status
Vacuum Operation ON
Vacuum and PTO OFF
Power Take-Off ON
WARNING
Advertisement
Table of Contents
