Playing An Mp3/Wma Disc - Philips DCM230 User Manual

CD/MP3-CD Operation
To find a passage within a track
1
Press and hold
S
remote control).
2
When you recognize the passage you want,
release / (or
S T
control).
➜
Normal playback continues.
To stop playback
● Press 9.
To interrupt playback
●
Press ÉÅ during playback.
➜
The display freezes and the elapsed playing
time flashes when playback is interrupted.
➜
To resume, press ÉÅ again.
Notes:
CD play will also stop when;
– you eject the disc.
– the disc has reached the end.
– you select another source: TUNER, USB, DOCK
or AUX.
– you select standby.
– the set auto off time expires.
18
5 /6
/ (or on the
T
5 /6
on the remote

Playing an MP3/WMA disc

1
Load an MP3/WMA disc.
➜
The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
2
Press ALBUM/PRESET +/- (or 3 / 4 on the
remote control) to select a desired album.
3
(or ¡
Press /
S T
control) to select a desired track.
➜
The album number will change accordingly as
you reach the first track of an album by pressing
(¡ on the remote) or the last track of an
S
album by pressing
T
4
Press ÉÅ to start playback.
Supported MP3 disc formats:
– ISO9660, Joliet
– Maximum title number: 999 (depending on
filename length)
– Maximum album number: 99
– Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
™ on the remote
/
(™ on the remote).