Cd/Mp3-Cd Operation; Loading A Disc; Basic Playback Controls - Philips DCM230 User Manual

Important!
The lens of the CD player should never be
touched.

Loading a disc

This CD player plays Audio Discs including CD
Recordables, CD-Rewritables and MP3 CD.
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
●
DRM-protected WMA disc is not supported.
1
Press SOURCE on the top of the system to

CD/MP3-CD Operation

select CD or press CD on the remote.
2
Insert a disc into the disc loader..
➜
iPod
➜
from the slot loader.
3
Press ÉÅ to start playback.
4
At any time, simply press 9 to stop playback.

Basic playback controls

To play a disc
●
Press ÉÅ to start playback.
➜
playing time of the track are displayed during
disc playback.
To select a different track
●
Press
control) once or repeatedly until the desired
track number appears in the display.
●
You can also use the Numerical Keypad
(0~9) on the remote to select a track directly.
●
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
TIMER
need to press ÉÅ to start playback.
Text display during playback
In CD mode
●
Press DISPLAY repeatedly to see the
following information.
➜
current track.
➜
time.
➜
of current track.
➜
time.
➜
In MP3-CD mode
●
Press DISPLAY to display the ID-3
information if available and the clock time.
Make sure the label side is facing up.
Make sure you have removed any other disc
The current track number and elapsed
(or ¡ / ™ on the remote
/
S T
Track number and elapsed playback time of
Track number and total elapsed playback
Track number and remaining playback time
Track number and total remaining playback
Clock time.
17