Table of Contents
Advertisement
(D
Note
Switch the compressor off after running
for 12 minutes at the most - danger of
overheating! Allow the compressor to cool
down for a few minutes before you use it
aga in.
Changing
a wheel
Before changing a wheel
Observe the following precautions for your
own and your passenger's safety when chang-
ing a whee l.
., After you experience a tire failure, pull the
car well away from moving traffic and try to
reach
level
ground before you stop ¢ _&. .
.. All passengers should
leave th e car
and
move to a safe location (for instance, behind
the guardrail) ¢ _&. .
., Engage the
parking brake
to prevent your
vehicle from rolling unint entionally¢ _&. .
., Move
se lector lever to posi tion P
¢
&_.
.. If you are tow ing a trailer: unhitch the trail-
er from your vehicle.
., Block the diagona lly opposi t e whee l with
the fold ing chocks or ot her objects.
.. Take the
jack
and the
inflatab le s pare tire
out of the luggage compartment
¢ page 268.
,&.
WARNING
You or your passengers could be injured
while changing a wheel if you do not fol-
low these safety precautions:
-
- If you have a flat t ire, move a safe dis-
tance off the road. Turn off the eng ine,
turn the emergency flashers on and use
other warning devices to alert other mo-
torists.
- Make sure that passengers wait in a safe
place away from the vehicle and well
away from the road and traff ic.
- To help prevent the vehicle from moving
sudden ly and possibly slipping off the
jack, always fully set the parking brake
and block t he whee l diagonally opposite
What
do I do now?
271
the whee l being changed with the fold -
ing chocks or other objects. When one
front wheel is lifted off the ground, plac-
ing the Automatic Transmission in "P"
(Park) will not prevent the vehicle from
moving.
- Before you change a wheel, be sure the
ground is level and firm. If necessary,
use a sturdy board under the jack.
- After installing the inflatable spare t ire,
make sure that you replace the flat tire/
wheel in its storage area properly and
tighten t he knurled retain ing screw se-
curely .
Changing a wheel
When you change a wheel, follow these-
quence described below step-by-step and in
exactly that order.
1.
Remove the
deco rat ive whee l cove r*.
For
more details see also ¢ page 2
72,
Deco-
rative wheel covers or
¢
page 2
72,
Wheels with wheel bolt caps.
2. Loosen the
wheel bolt s
¢ page 272 .
3. Locate the proper mounting point for the
jack and align the jack below that point
¢ page 273.
4.
Lift
the car with the jack
¢
page 2 73.
S. Remove the
whe el with th e flat tire
and
then install the
inflatab le s pare tire
¢ page 274.
6. Tighte n all whee l bolts lightly.
7.
L owe r
the vehicle with the jack .
8. Use the wheel bolt wrench and
firmly
tighten all wheel bolts ¢ page 272 .
9 . Replace the decorativ e
wheel cover*.
,&.
WARNING
-
Always read and follow all WARNINGS and
informat ion¢
A
in Raising the vehicle on
page 274 and ¢ page 275 .
•
•
Advertisement
Table of Contents
