Table of Contents
Advertisement
..
Press the
~
button
@
r::?v
page 115, fig. 106
on
the control
unit.
Unlocking the control unit
Requirement: the PIN must be activated.
..
Press any button on the control unit.
.,. PIN?
appears on the display field
.
..
Enter the
PIN
.
..
Press
the
IOKI
button
@
.
{O)
Tips
-
The PIN is
deactivated
in the
factory
default
settings.
-
If you do not remember your
PIN,
contact
an authorized Audi dea ler or authorized
Audi Service Facility.
-
If
the
first PIN entry differs from the second
ent ry, the
first PIN
entry is displayed.
-
If
nothing is entered with in 20 seconds of
th is, the set value is
not
changed.
Indicator
Lights and
messages
Applies
to
vehicles: with plug-in hybrid drive
If
the
B
indicator light turns on, the
high-volt-
age battery is charging or
is
already completely
charged.
If the
.
indicator light
stays on,
there is
a mal-
function in the charging system. Have the prob-
lem corrected immediately by an
authorized
Audi
dea ler or authorized Audi Service
Facility.
l'I
Charging connector still
atta ched. Driving
not possible
This message appears when the charg ing system
is
sti
ll
connected to the veh icle
.
Remove
the
con-
nector
r::?v
page 117, After
charging.
1,1
AC charging: currently
not possible
This message appears when the charging system
is
incompatible. Only charge using the charging
system that is designed for your vehicle.
;:::
1,1
AC charging
:
system
fault! Plea
se
contact
0
iii
Service
e-tron
This message appears if there is a malfunction
in
the charging system. Have the prob lem corrected
immediately
by an authorized Audi dealer or au-
thori zed Audi Service
Facility.
Vehicle
charging
connector
emergency
release
Applies to vehicles: with plug -in
hybrid
drive
There
could
be a malfunction if you are not
able
to pull
the
vehicle charging connector out of the
vehicle charging port. You must use the emer-
gency
release
to release the vehicle charging con-
nector.
Requirement: the se lector lever must be in the P
position, the vehicle must be unlocked and the
charging process must have been ended or inter-
rupted.
.,.
Press and hold the
immediate
charging button
@
r::?v
page 115, fig
.
107
.
..
Press the
[@l
button on the remote control
key
at the same time.
..
Remove the connector.
..
Drive to an authorized Audi dealer or author-
ized Audi Service Facility immediately to have
the malfunction corrected
.
If the charging connector still cannot be removed
after using the emergency release, see an author-
ized Audi dealer or authorized Audi Service
Facili-
ty for assistance
.
Charging
unit
cover
emergency
release
Applies
to vehicles: with plug-in
hybrid
drive
~
Fig.
111 Front of the vehicle: cover emergency release
U"I
121
Advertisement
Table of Contents
