Table of Contents
Advertisement
Turning on and off
Note:
•
For optimum purification performance, close doors and windows.
Keep curtains away from the air inlet or air outlet.
•
1
Put the plug of the appliance in the power socket.
2
Tap
to switch on the appliance.
The appliance beeps.
»
The "
" displays on the screen during warming up.
»
In Purification ONLY mode, the screen shows PM2.5 level after
»
measuring the air quality.
In 2-in-1 mode, the screen shows the current humidity.
»
3
Tap and hold the
Note: If the appliance stays connected to the electrical outlet after turning
OFF, it will operate under the previous settings when turned ON again.
Water level
If the water tank does not have enough water, the
continue to work and maintain the same fan speed. Once you add water to the tank, the
will turn off.
Note: When the appliance is in Purification ONLY mode, it cannot humidify the air. As a result, the
indicator will not appear on the screen.
Refilling water
Note:
•
Ensure the top lid is securely installed before refilling the water tank.
•
Add water slowly to prevent splashing and avoid exceeding the maximum water level indicated on
the appliance.
The water tank can be refilled in two ways: either directly without opening the top cover (Method A) or
by opening the cover and adding water through a tap (Method B).
Method A: If using the direct refill method, monitor the water level through the transparent window
•
on the water tank to prevent overfilling. Any excess water will be drained through the overflow
outlet.
Method B: If using the tap method, do not exceed the water level indication when adding water.
•
A
EN
8
button for 3 seconds to switch off the appliance.
<40
indicator will turn on, but the appliance will
B
indicator
Advertisement
Table of Contents
