Table of Contents
Advertisement
Turning on and off
Note:
For optimum purification performance, close doors and windows.
•
Keep curtains away from the air inlet or air outlet�
•
Plug the appliance into the power outlet; do not use a power strip�
•
1
Plug the Air Performer into the power socket.
2
Touch
to switch on the Air Performer.
» The Air Performer beeps.
» The "
up. Then the Air Performer shows the PM2.5 level
after measuring the air quality.
3
Touch and hold the
the Air Performer.
Note: If the Air Performer stays connected to the electrical outlet after turning it OFF, the Air
Performer will operate under the previous settings when turned ON again�
Oscillation
Press the
button to activate the oscillation feature in your
Air Performer, the appliance can oscillate at these angles:
45°, 90°,180°, 270°, 350° and OFF.
» The oscillation angle displays on the screen.
» If no operation is performed within 3 seconds, the
appliance goes back to normal display.
Function switch
You can choose the Circulation (
button. You can adjust the fan speed manually; see section "Setting fan
the
speed�"
EN
10
" displays on the screen during warming
button for 3 seconds to switch off
) function, or Fan function (
Circulation function (
It distributes diffused airflow for optimal
air circulation by opening the back outlet,
maximizing purification performance and
reducing cooling sensation. At higher speeds, a
soft current of airflow will blow harder through
the front outlet to increase cleaning power.
) by pressing
):
Advertisement
Table of Contents
