Table of Contents
Advertisement
Settings
To configure an e-mail account, select one and press
to access the menus detailed below.
OK
Rename profile
To rename an account from its default name. If one of
the accounts has been pre-configured, it may be
locked, in which case it cannot be renamed.
E-mail server
To configure the settings needed to connect to your e-
mail service.
Password
The password to access your e-mail
account.
Your e-mail address.
E-mail
address
The Simple Mail Transport Protocol
SMTP
(SMTP) address. This is the server for
address
your outgoing mail and is usually in a
format like smtp.yourmail.com.
POP3
The Post Office Protocol (POP)
address. This is the server for your
address
incoming mail and is usually in a format
like pop3.yourmail.com.
The login (or user name) to access your
Login
e-mail account.
30
You must obtain the POP3 and SMTP addresses from
your e-mail service provider.
If you wish to use a GPRS connection to access your e-
mail, you may need to use the SMTP server of your
mobile service provider to send e-mails.
Advanced
Port POP3
The port number on the POP3
server. This is usually port 110.
Port SMTP
The port number on the SMTP
server. This is usually port 25.
The IP address of your Domain
DNS
Name Server.
address
SMTP authentication is usually set to
SMTP
Off. Contact your provider for more
authenticat.
information.
Network access
Before you can consult your e-mails, you first need to
configure your connection to the internet.
GSM Settings
When you use a GSM connection to connect to the
internet, your mobile phone dials a number provided
by your network operator and the data is sent and
received over this connection, somewhat like a dial-up
Messages
Advertisement
Table of Contents
