B2. Installing The Charcoal Filter - Samsung BESPOKE ME21DG6500MT Installation Instructions Manual

3. Remove the screw that holds the blower motor and
carefully pull out the blower unit. The wires will
extend far enough to allow you to adjust the blower
unit.
CAUTION: To avoid breaking or cracking the blower
blade, do not touch the blade. Hold the outer case of
the blower when you pull it out or put it back in place.
4. Roll the blower unit 90 ° so that the fan blade
openings are facing toward the front of the
microwave.
Before Roll
5. Place the blower unit back into the opening.
CAUTION: Do not pull or stretch the blower unit wiring.
Make sure the wires are not pinched.
6. Remove the metal vent fan cover on the back of the
microwave by sliding it up.
DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 13 DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 13
Step-by-step installation guide
7. Close the blower door. Slide blower shield onto the
8. Secure the blower to the microwave using the
After Roll

B2. INSTALLING THE CHARCOAL FILTER

1. Open the door before turning on the power at the
2. Remove the vent grille mounting screws.
3. Slide the vent grille to the left, then pull it straight out.
4. Install the charcoal filter. Slide a new charcoal filter
5. Replace the vent grille and 2 screws.
6. Close the door.
13
top of the blower door opening.
blower retaining screws from Step 1.
Blower Retaining
Screw
Back of
Microwave Oven
main power supply.
into place. The filter should rest at the angle shown.
The filter angle
Blower Retaining
Screws
Charcoal filter
2024-02-16 오전 9:30:36 2024-02-16 오전 9:30:36