WARNING:
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT — This Document is customer property and is to remain with this unit. Please return to service
information pack upon completion of work.
Kit Contents
Items
Bracket-Hold Down (G90 Steel)
Self drilling #12-3/4" Screws
Inspection
Check carefully for any shipping damage. This must be
reported to and claims made against the transporta-
tion company immediately. Any missing parts should
be reported to your supplier at once, and replaced with
authorized parts only.
Installer's Guide
Extreme Condition Mounting Kit
BAYEXMK003 for Slab Mounting -
HAZARDOUS VOLTAGE - DISCONNECT POWER BEFORE SERVICING
Quantity
4
4
BAYEXMK003
REPLACE AFTER SERVICE
18-HE75D1-1C-EN
Installation
1. Attach the (4) Base Brackets to the unit base using
(4) of the #12 3/4" self drilling screws in the kit into
an existing screw location on the unit. Install one (1)
bracket on each side of the unit. Attach the brackets
to the slab using (4) field provided bolts appropriate
to the material the unit is mounted on (recommend a
0.25" diameter bolt with a minimum of SAE-Grade 5
(ASTM-A449) or better with appropriate washer).
All Cabinet Sizes