INSTALLER'S
GUIDE
ALL phases of this installation must comply with
NATIONAL, STATE AND LOCAL CODES
Horizontal Hanging Kit:
BAYHANG
IMPORTANT — This Document is customer property and is to remain with this unit. Please return to service information pack
upon completion of work.
Section 1. Safety Information
s
s
SAFETY HAZARD!
This information is intended for
use by individuals possessing adequate backgrounds of
electrical and mechanical experience. Any attempt to
repair a central air conditioning product may result in
personal injury and/or property damage. The manufac-
turer or seller cannot be responsible for the interpretation
of this information, nor can it assume any liability in con-
nection with its use.
s
s
SAFETY HAZARD!
of sharp edges on equipment or any cuts made on sheet
metal while installing or servicing. Personal injury may
result.
Section 2. General Information
Open and inspect contents for
damage or missing items.
Each kit will contain:
Item
Qty
Description
1
4
1" SS Screw
2
4
Nut, Lifting Eye, SS
3
4
Lock Washer, SS
4
8
Flat Washer, SS
5
1
Installer's Guide
WARNING
WARNING
Sharp Edge Hazard. Be careful
18-CH81D1-1A-EN
Fits Models:
S-Series
Furnaces
Important: Do not screw, cut, or otherwise puncture the
unit cabinet in any location other than those illustrated
in this Installer's Guide or in an approved accessory's
Installer's Guide.
Important: If applicable, make certain that the unit has
been installed in a level position to ensure proper drain-
ing.
Important: Under no condition should metal strapping
be attached to the unit to be used as support mecha-
nisms for carrying or suspension purposes.
①
③
②
④