Removing The Cassette Separation Roller - Canon PF-D1 Service Manual

Procedure for Installing the Cassette Pickup Roller Unit
1. When installing, align the left shaft [1] with the hole [A] of the Cassette Pickup Roller Unit [2], and push it in until it stops.
[1]
2. Install the Cassette Pickup Roller Unit [3] while returning the left shaft [2] so that the right shaft [1] aligns with the hole [B]
of the Cassette Pickup Roller Unit.
CAUTION:
After installation, push the lever [1] and check that the link [2] is fitted in the hook [3] of the Cassette Pickup Roller Unit. If
not, remove and install the Cassette Pickup Roller Unit again.
[1]

Removing the Cassette Separation Roller

■ Preparation
1. Remove the cassette.
[A]
[1]
[B]
[1]
[2]
[2]
33
4. Disassembly/Assembly
[2]
[1]
[3]
[3]