Rotary Switch; Overload Protection - Bosch MG2213C I Series Information For Use

en Jar capacity
capacity Jar
Jar capacity
When using the jars follow the capacities in the table. Minimum capacity for all the jars is
capacity Jar
at least up to blade level.
Jar
Big jar
Medium jar
Chutney jar
switch Rotary

Rotary switch

switch The rotary switch is used to start and stop Rotary
processing and select the speed.
Symbol Function
Off Stop processing.
Process ingredients at low
speed.
Process ingredients at max-
imum speed.
Pulse Process ingredients briefly at
maximum speed until the
rotary switch is released.
To blend, liquefy and purée.
Notes
¡ Use position 1-3 for continuous opera-
tion. Position 1 is the slowest operating
speed. Position 3 is the fastest operating
speed.
¡ The Pulse function is especially suitable
for chopping food for chutneys.
6
Size
1.2 litre
0.8 litre
0.4 litre
Rated capacity
Dry
-
0.35 litre
0.2 litre
protection Overload

Overload protection

protection The appliance is equipped with an overload Overload
protection device. The overload protection
device prevents the motor from being dam-
aged by overloading.
Resetting overload protection
Note
In the following cases, the overload
protection device will activate and the red
button on the underside will pop out:
¡ If the jar is overfilled with ingredients.
¡ If the jar is filled with a very thick paste.
¡ If there is an undervoltage on the appli-
ance.
Switch off the appliance and remove the
1.
excess ingredients.
If the paste is too thick in the jar, add
enough water and wait 2 to 3 minutes.
Press the red reset button and start the
2.
appliance again.
Wet
0.6 litre
-
0.2 litre
Liquidise
0.6 litre
-
-