Table of Contents
Advertisement
Remote voice control
If you have connected a cell phone
to your DS6771 telephone system,
you can activate the voice-controlled
application (voice app) of the cell phone,
such as Siri
, Google Now
or
®
TM
S Voice
, via your handset or headset.
®
The remote voice control feature works
with:
Voice-
Siri
Google
S Voice
controlled
Now
application
Operation
iOS
Android
Android
System
(8 or
(4 or
(4 or
(Versions
above)
above)
above)
supported)
Before using the remote voice control
feature, make sure you checked the
following:
• Your cell phone is paired and
connected to your telephone system
via Bluetooth.
• No Bluetooth applications are running
in the background of your cell phone.
• Place your cell phone next to the
telephone base.
• Do not lock up your cell phone's
screen or set passcode for activating
the voice app.
Siri
®
is a registered trademark of Apple Inc.
Google Now
is a trademark of Google Inc.
TM
S Voice
is a registered mark of Samsung Electronics
®
Co., Ltd.
• Make sure you have turned on or
logged in to the applications on your
cell phone that you will be sending
your voice commands, such as
GPS, email and social networking
accounts.
• Your cell phone's data or Wi-Fi signal
is in full strength and your cell phone
can connect to the Internet.
• Try to activate the voice app on your
cell phone to ensure it is in place.
20
Activate remote voice control on
handset
1. Press VOICE on the handset.
• If you have connected one cell
phone to the telephone, the
handset shows the device name of
the connected cell phone directly.
• If you have connected two cell
phones to the telephone, the
handset shows Select a device,
followed by the device name list of
the connected cell phones. Scroll
to choose the desired cell phone,
and then press SELECT.
2. The handset then shows the remote
voice control icon
.
• If the activation fails, the handset
displays Not available. When the
screen returns to idle, try Step 1
again.
3. When the handset plays the
confirmation tone as forwarded by the
cell phone's voice app, start speaking
toward the handset, and then wait
for feedback. Make reply to the voice
app's feedback, if necessary.
• You can press
on the handset
to turn off the speakerphone and
listen to the feedback through the
handset earpiece.
4. To end the current remote voice
control session, press CANCEL
on the handset. You can restart by
following Steps 1-3 mentioned above.
Activate remote voice control on
headset
NOTE
• Make sure the CELL 1 slot on the
telephone base is paired and connected
with a cell phone.
1. Press MUTE on the headset.
2. When the headset plays the
confirmation tone as forwarded by the
cell phone's voice app, start speaking
toward the headset, and then wait
for feedback. Make reply to the voice
app's feedback, if necessary.
3. To end the current remote voice
control session, press the ON/OFF
key on the headset. You can restart
by following Steps 1 and 2 mentioned
above.
NOTES
• Once you have activated the remote voice
control feature, you are using your cell
phone's voice app to operate your cell
phone.
• Please check the cell phone user's
manual and the voice app's help topics to
find out what commands you can use and
any limitations of the voice app.
• Some cell phone manufacturers or
network carriers may customize the
phone's operating system and implement
their own voice app. If you want to use
Google Now, you need to manually set
it as your default voice app. For detailed
instructions, refer to your cell phone user's
manual, or contact your cell phone's
manufacturer or network carrier. You may
also go to "Google Product Forums" on
the Internet and check the corresponding
help topics.
• Due to the settings of certain cell phones
and voice apps, your cell phone may not
support the remote voice control feature.
Contact your cell phone's manufacturer or
network carrier, or check the voice app's
help topics if you encounter any problems.
21
Advertisement
Table of Contents
