Adjusting The Output Icvh; Plating Trades Repeatedly (Repeat Play) - Sony MXD-D3 Operating Instructions Manual

Playing CDs and MDs
Adjusting the Output Level
You can adjust tht* lovd nr the playback signal output
from lh»* I INE (ANALOG) OUT and PHONES lacks
Playing Tracks Repeatedly
(Repeat Play) [X
You can play tracks repeatedly In any play mode.
MENU/NO AMS
1 While the deck Is stopped, playing, or pausing,
press MENU/NO twice to display "Setup Menu '
2 I urn AMS lo select "Aout \ then press AMS
OQQ
ooo
aoo
OOO
OOO
OOO
□o°
ooo
QO®
1 Set SELECT to CD or MO
3 Turn AMS to change the output level within a To Stop Repeat Play
range ot 0.0 dB to -20.2 dB. then press AMS
Press ■
4
Press MENU/NO.
You can also change the output level using the
remote I
tiuniiKplayback, pa-w 11VII. ./ repeatedly. Not*
thill the level cannot go above 0 ilU or lower than
-2t'
.*
dB,
Note
I tie output level netting returns to the initial value (0.0 dB)
when you turn oil the deck or disconnect the AC power
cord
To cancel Repeat Play
l*ns- REPEAT repeatedly until "REPEAT disappears
Repeating the current track only
While the track you want to repeat
is
playing in
normal. Shuffle nr Program Play, press REPEAT
repeatedly until "REPI AT 1" appears in the display.
II you velvet KFPtAT I while the deck is -topped,
the dock repeats the next track that you locate lo play
13