Panel Facilities - Pioneer F-F3-J Service Manual

Hide thumbs Also See for F-F3-J:
Table of Contents

Advertisement

1

2.3 PANEL FACILITIES

Front Panel
A
1
POWEROFFON
2
STANDBY indicator
B
3
Display
4
RDS indicator
Lights when an RDS broadcast is received, and
flashes during RDS search.
5
TUNED indicator
Lights when a station is properly tuned in.
6
STEREO indicator
Lights red when a stereo broadcast is received.
Goes off when a monaural broadcast is
received. Lights blue when the MPX mono
mode is selected.
C
7
BAND
Selects FM or AM.
8
MENU
Use to enter/exit menu mode.
The unit times out if no operation is performed
for about five seconds after the menu mode is
set.
Tip
• Liquid Crystal Display
D
The LCD used in this unit has a tendency to
change color in response to the
surrounding temperature. The display's
color tone may turn gray or its ability to
switch between displayed information may
slow down when the room is not at
optimum temperature, or when the unit
has been operating for a long period of
time. However, these are only temporary
symptoms and regular functionality will be
restored once the unit returns to optimum
temperature.
E
F
8
1
2
1
2
3
POWER
STANDBY
OFF
ON
10
2
3
4
5
6
7
8
BAND
MENU
RDS
TUNED
STEREO
DISPLAY
AUTO PRESET
11
12
9
TUNING/PRESET dial
Press this dial to select an option or execute a
command.
Turn this dial to select menu options, radio
presets or stations.
In the tuning mode, the reception frequency
can be tuned in an increasing or decreasing
direction. Turn the dial clockwise to change the
reception toward higher frequencies. Turn the
dial counterclockwise to tune the reception
toward lower frequencies.
In the preset mode, turning this dial moves the
selected preset channel up or down. The auto
tuning operation cannot be used when in this
mode.
When inputting station names, use this dial to
select desired characters.
10 Remote sensor
11 DISPLAY
Use to select the display mode.
12 AUTO PRESET
When pressed during FM or AM mode,
receivable stations are automatically stored in
the preset memory in order starting from
preset channel A1.
F-F3-J
3
4
9
F3
TUNING/PRESET
4

Advertisement

Table of Contents
loading

Table of Contents