Table of Contents
Advertisement
Available languages
Available languages
04 USING A WIRED
CONNECTION
1
HDMI Cable
2
Optical Cable (not supplied)
HDMI OUT
HDMI IN
(ARC)
Connecting using an HDMI Cable
(External Device (HDMI) / TV ARC/eARC)
OPTICAL OUT
Connecting using an Optical Cable (D.IN)
NOTE
• When the TV sound is not output, press the
Function) button at the top of the Soundbar or the
(Source) button on the remote control to select
the "TV ARC" mode.
• The recommended cable is an HDMI cable certified
by HDMI.org.
CH LEVEL
• When you use an optical cable and the terminals
have covers, be sure to remove the covers.
Using the Q-Symphony Function
When the Soundbar connects to a Samsung TV that
supports the Q-Symphony function, you can play the
sound simultaneously through the Soundbar and the TV.
If you use the Q-Symphony function, the surround sound
played on the TV allows you to enjoy a richer, more
three-dimensional surround sound effect.
When the Soundbar is connected, "Q-symphony" menu
appears on the TV. (The message displayed may differ
with the TV model.)
(Settings (
) → All Settings (
Output)
DIGITAL AUDIO IN
(OPTICAL)
1
HDMI
1
HDMI TO TV
(eARC/ARC)
DIGITAL AUDIO IN
2
(OPTICAL)
SOUND
HDMI 1
MODE
WOOFER
HDMI 2
CH LEVEL
CONTROL
(Multi
SOUND
MODE
WOOFER
TONE
CONTROL
) → Sound → Sound
ENG - 4
Using the SpaceFit Sound
This function analyzes the user's listening space with the
Soundbar's microphone and provide optimal sound for
the space. Sound optimization proceeds automatically.
05 USING A WIRELESS
CONNECTION
Connecting via Bluetooth
Top of the Soundbar
BT PAIRING
OR
• Search for the Bluetooth device on your TV or mobile
device.
What is the difference between BT READY and BT
PAIRING?
TONE
• BT READY : In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
• BT PAIRING : In this mode, you can connect a new
device to the Soundbar.
(Press the PAIR button on the Soundbar remote
control or press and hold the
on the top of the Soundbar for more than 5 seconds
while the Soundbar is in "BT" mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a
wireless network (Wi-Fi), the SmartThings app is
required.
1. Connect your mobile device (smartphone, tablet, etc.)
to the Wi-Fi network the TV is connected to.
2. Install and launch the SmartThings app on your
mobile device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the
mobile device to connect the Soundbar to your Wi-Fi
network.
5 sec
OR
(Mic On/Off) button
Advertisement
Table of Contents
