5-SUIT/CLUB STOVE ASSEMBLY
Live electrical parts: only power the product once it has been fully assembled.
On delivery, the Suite and Club stoves have no ceramic cladding, as shown in the image below.
Take the box with the ceramics (figure below) and prepare them for installation. The ceramics are already completely assembled (ceramics
and mounting brackets) and must be mounted as per the attached diagram, "Side panels assembly" page.
STOVE STRUCTURE
The ceramics are delicate, therefore handle with care.
POS.
DESCRIPTION
A
CERAMIC TOP
B
LOWER CERAMIC PANEL
C*
LATERAL CERAMIC PANEL
m
M4X10 SCREW
THE FIGURE SHOWS SUITE STOVE CERAMICS (THE DECORATION CHANGES FOR CERAMICA CLUB)
C* = BASED ON THE LAYOUT, THE CERAMICS WILL BE CALLED D1/D2/D3 AND S1/S2/S3
Technical Dept. - All rights reserved - Reproduction prohibited
B
No.
POS.
DESCRIPTION
1
n
M4X12 FLAT WASHER
1
k
M4X16 SCREW
(if not present in the lower panel
mounting bracket "B")
6
24
A
CERAMIC CLADDING
No.
24
2
C
27