Nakamichi RE-1 Owner's Manual

— BNokamichi
RE-1/RE-2/RE-3
Owner's Manual
WARNING
WARNING
The Federal Communications Commission does not allow
any modifications or changes to the unit EXCEPT as that
specified by Nakamichi in this manual. Failure to comply
with this government regulation could void your authority
to operate the equipment.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN!
CAUTION
NO USER-SERVICEABLE PARTS INSIDE.
Please record the Serial Number in the space provided below and retain this
record.
The Serial Number is located on the rear panel of the unit.
Model Number : RE-1 / RE-2 / RE-3
Serial Number :
Precautions
Cleaning the Receiver
Never block the ventilation openings on the top of the unit.
Controls and Functions
Front Panel
1. Power Button
2. Power Indicator
This indicator shows the operational status of the unit.
* Indicator out : Power is off.
« Indicator lit : Unit is in standby condition.
3. AM/FM Button
This button selects the tuner band.
4, Listen Monitor Selector
The desired program source for listening can be chosen with these buttons
(independent of the Rec Out Selector setting on RE-1 and RE-2).
When the unit is in the standby mode, operating one of the selector buttons will
activate the receiver and other equipment connected to the "Switched" AC out-
lets on the rear panel, and the selected source can be heard (direct operation).
¢ Tuner : AM/FM reception
* Video 1 : VCR playback (RE-1)
Video 2 : VCR playback (RE-1)
Video : VCR or cassette deck playback (RE-2/RE-3)
¢ Tape 1 : Cassette deck playback (RE-1)
Tape 2/ VCR : Cassette deck playback (RE-1)
Tape : Cassette deck playback (RE-2)
Tape Monitor : Tape monitor (playback) (RE-3)
*CD : CD player playback
¢ Phono : Record player playback
5. Indicator Panel
6. Audio Mute Button (RE-1/RE-2)
7. Volume Indicator
8. Volume Control
As a precaution, you should turn the volume control fully down before turning
the unit on and before changing program sources.
9. Phones Jack