Chapter 13 Layer 2 (L2) Management
Table 25 L2 Management (continued)
LABEL
Port
Delete
13.1.1 Add a Static MAC Address Entry
Click Add in the L2 Address Management screen to display the configuration screen as
shown.
Figure 46 Add a Static MAC Entry
The following table describes the labels in this screen.
Table 26 Add a Static MAC Entry
LABEL
MAC Address
VID
Port
Add Address
13.2 Viewing the L2 Address Table
Use the L2 Address Table screen to view entries in the MAC address table. Click L2
Address > Display in the navigation panel to display the screen as shown.
84
DESCRIPTION
This field displays the port number of a manually entered MAC address entry.
Click DELETE to remove this manually entered MAC address entry from the MAC
address table.
DESCRIPTION
Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Select the port where the traffic with the destination MAC address entered in the
MAC Address field will be automatically forwarded.
Click this to add this entry into the MAC address table.
ES-1552 User's Guide