Table of Contents
Advertisement
10 - SUBTITLE
To open Subtitle page. Long press to open or close
Text/Teletext.
11 - TV ( ) / EXIT
To switch back to watch TV or to stop an interactive TV
application. However, it might not work on some
applications; behaviour is dependent on third party TV
apps.
This key will be changed to Number key 0 after 123 key
is pressed.
12 - Home
To open the Home menu.
13 - (Channel)
Move down or up to switch to the next or previous
channel in the channel list. To open the next or previous
page in Text/Teletext. Press the middle of key to open
the channel list.
Bottom
1 -
Colour keys
Direct selection of options. Press Blue key
Help.
2 -
• If you have a Netflix membership subscription, you can
enjoy Netflix on this TV. Your TV must be connected to
the Internet.
• To launch the Netflix, press
immediately with the TV switched on or from standby.
www.netflix.com
3 -
To launch the Disney+ App.
4 -
Eco / Green key
Press to invoke a message to remind you to enter the Eco
settings menu; long press to invoke the Eco settings
menu directly. Once the Eco settings menu is triggered
via long press the key few times, the message will no
longer to show.
5 - Playback (hidden keys, available after 123 key is
pressed)
• Play , to playback.
to open the
to open Netflix
• Pause , to pause playback
• Rewind , to rewind
• Fast forward , to go fast forward
6 -
To launch the Amazon prime video App.
7 -
To launch the Titan Channels App.
8 - Quick keys
Press the quick key to launch app or streaming media
directly. The actual quick keys are varied between
regions or countries.
3.2. Pair Your Remote Control
to TV
This remote control uses both Bluetooth® and IR
(infrared) to send its commands to the TV.
• You can use this remote control via IR (infrared) for
most operations.
• To use Alexa voice control operations, you need to pair
(link) the TV with the remote control.
When you started the initial TV installation, the TV
invited you to long press the PAIR key, and by doing so,
the pairing was done.
Note:
1 - Once the remote control has entered pairing mode
successfully, the LED indicator around the microphone
on the front side of the remote control starts blinking.
2 - The remote control must be kept close to the TV
(within 1m distance) during pairing in order to ensure
success.
3 - If the TV does not launch the Alexa voice control
operations when press
unsuccessful.
4 - It is advisable to wait until the set has fully started up
and launched all background processes before pairing
mode is entered as the toast message containing further
instructions may appear too late, thereby negatively
impacting the pairing procedure.
Pairing or pairing again
If the pairing with the remote control was lost, you can
pair the TV with the remote control again.
You can simply long press the SOURCES (PAIR)
key (approximate for 3 seconds) for pairing.
Alternatively, go (Home) > Settings > Wireless &
network > Remote control > Pair remote control, then
follow the on-screen instructions.
A message appears when the pairing is successful.
Remote Control Software
(Home) > Settings > Wireless & network > Remote
8
Alexa, pairing was
Advertisement
Table of Contents
