Philips 200P4VS/00 User Manual page 60

Setting up and Connecting Your Monitor
special Mac adapter to one end of the monitor signal cable.
Connect the cables to the back of your computer by following these steps:
(a)
(b)
(c)
(d)
(e)
file:///D|/My%20documents/dfu/J/english/200p4/install/connect.htm (2 of 4) [4/15/2004 1:45:29 PM]
If you use an Apple Macintosh
Turn off your computer and unplug its power cord.
Connect the VGA or DVI cable to the video connector.
Connect the audio cable.
Plug the power cord of the computer and the monitor into a nearby outlet.
Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
TM
, you need to connect the