Advertisement
MULTIPURPOSE CHOPPER OPERATION
1.
Before ´Ust use, the chopper accessories must be cleaned. Wash with warm
water and mild detergent. Rinse with fresh water and allow to dry.
Your multipurpose chopper is now ready for use.
2.
Ensure unit is unplugged from wall power outlet.
3.
Insert the blade into the chopper bowl and onto the spindle.
4.
Add ingredients into the bowl being careful not to touch the blades.
5.
Place lid onto the bowl and insert the chopper body into the lid.
6.
Ensuring
your ´QJHUV are not pressing either of the buttons on the top of the
chopper body, plug the power cord into the A/C outlet and switch on.
7.
Begin operation by pressing the power level buttons on the top of the chopper
body.
8.
After use, unplug from the wall power outlet.
WARNING The multipurpose chopper blades are very sharp, avoid touching
them and handle with care.
WARNING Do not plug the appliance into power before it is fully assembled.
WARNING Exercise caution when removing the attachments from the chopper
DQG HQVXUH WKH DSSOLDQFH LV WXUQHG RII DQG XQSOXJJHG ZKLOVW ´WWing attachments.
WARNING Do not blend hot or boiling foods or liquids as there is a risk of burns
or scalding.
CAUTION It is not recommended to run the multipurpose chopper
continuously for more than 2 minutes at a time for light substances. Do not mix dry,
thick or heavy mixtures continuously for more than 30 seconds. Stop the operation
and stir the ingredients before continuing. Allow the motor to rest for 1 minute
bet
ween each use.
NOTE: All multipurpose choppers are designed to operate only when the power
buttons remain depressed.
© 2023 RVM Australia Pty Ltd. All Rights Reserved
5
Advertisement
