Table of Contents
Advertisement
Connection
• Concerning
the audio output from the player's
audio input/output
(optical
digital
audio output) connector
Disc
DVD
Video CD
CD
Sound recording
format
Dolby Digital (AC-3)
Linear PCM
(48/96 kHz 16/20/24
bit)
dts
MPEG
1
Linear PCM
Optical
digital audio output from
connector
• Dolby Digital (AC-3) bitstream
(1-5.1 ch)
ePCM (48 kHz/16 bit) (2ch) ÷1÷2
oLinear
PCM (2ch)
(48 kHz sampling/16
bit only)
eNo output _2
• dts bitstream
(1-5. lch)
• No output _2
PCM (44.1 kHz sampling)
,1
Linear PCM (44.1 kHz sampling)
_1 Compressed
sound converted
to PCM will be output.
_2 The type of audio output from the connector
can be selected
by "6 Digital Audio Output"
of the initial settings.
Note:
• Some dts decoders which do not support DVD-dts
interface may not work properly with
the portable
DVD/Video
CD/CD
player.
For your reference:
• If you have a Dolby Pro Logic Surround decoder,
you will obtain the full benefit of Pro
Logic from the same DVD movies that provide full 5.1-channel
Dolby Digital soundtracks,
as well as from titles with the Dolby Surround mark.
Caution for the audio input/output (optical digital audio output)
connector:
eWhen
connecting
an amplifier
(with an optical
digital
input connector)
which
does not contain
the Dolby
Digital
(AC-3)
or dts decoder,
be sure to select
"PCM"
at "2 Dolby Digital" and "Off"
at "3 dts" of the initial setting
"6 Digital
Audio Output".
(See page 60.)
oOtherwise
any attempt
to play DVDs
may cause such a high level of noise that it
may be harmful to your ears and damage
your speakers.
oVideo CDs and CDs can be played as they would normally
be played.
68
Advertisement
Table of Contents
