Common Procedures Coccocococccoocacancnnonconanoncnonaconancnnrncnncnnnncnncnncnanrcrnoranas; Entering A Password (Ratings); Digital Output Cicsesecsssesevstsvesscnvaieisectectestesossaivesceccsesecisvcdsescessscessevesistor - Panasonic DVD-CP67 Operating Instructions Manual

Numbered
buttons
Common procedures
Remot tonl
See page 16 for menu and option details.
The QUICK SETUP screen appears when you press [SETUP] the
first time after purchase (= page 7).
Press [ 4, P] to select the menu's tab.
The screen changes to display the menu.
Disc Video Audio
Others Display
pii
Press [A, V] to select the item you want to
change and press [ENTER].
Press [A, Y] to select the option and press
[ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
Som)
Entering a password (Ratings)
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
elf you enter a wrong number, press [CANCEL] to erase it before you
press [ENTER].
eThe lock symbol appears closed to show the rating is locked.
Do not forget your password.
2. Press [ENTER] to contirm the 4 digits.
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.
Digital output
DVD-V
Change the settings when you have connected equipment through this
unit's DIGITAL AUDIO OUT terminal (OPTICAL).
PCM Down Conversion
Adva opera |
Select how to output audio with a sampling frequency of 96 kHz.
Select "Yes" if the equipment you connect cannot process signals with a
sampling frequency of 96 kHz.
eSelect "No" if you use analog connection irrespective of the type of
equipment.
No (Factory preset):
Output as 96 kHz. There is no output if the disc has copy protection. Select
"Yes" in this case.
Yes:
Converted to 48 kHz for output.
Dolby Digita! and DTS Digital Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM:
Select if the equipment you connected cannot decode the signal.
Off (Factory preset for OTS Digital Surround):
Select if the equipment you connected cannot decade the signal.
IMPORTANT
lf the equipment you connected cannot decode the signal, the
setting must be changed to PCM or Off. If not, signals the equipment
cannot process will be output by this unit, causing high levels of
noise which can damage your hearing and the speakers.
E RQT6519