Table of Contents
Advertisement
ding is not
netion, So if
) finishes in
ng in the ~«
of the tape,
ntal erasure
record on,
ack H.
start of the
lesired
sm must be
ecorded
ns on
orded.
ding.
press PLAY
2:
es between
ding.
UND
FIELD
otrecorded.
hone mixing
mixing" on
IN
n automatic
roles on the
ing used, in
ing bias and
RECORDING
SYNCHRO
COPY
Comme
Y
3
REC
PAUSE
PLAY
7
=>
he
Copying a tape
|
2 Press SYNCHRO COPY to start copying.
To stop copying:
Press one of the STOP m buttons. Both decks will stop
simultaneously.
@
Ifa tape recorded with the DOLBY NR system is copied,
the copied tape willalso be recorded automatically with the
DOLBY NR system regardless of the setting of the DOLBY
NR switch, if a tape recorded without the DOLBY
NR
system is copied, the copied tape will also be recorded
automatically without the DOLBY NRA system.
® To perform normal copying while listening to playback, set
the INPUT SELECTOR button on the receiver to TAPE and
select the eppropriate DOLBY NR switch position,
@ The tape copy mode is canceled when the end of either of
the tapes is reached, so itis advisable to use tapes of the
same length.
To erase the contents of a tape
1 Load the tape to be erased into Deck Hl.
@ Check to see that the accidental erasure prevention tab
has not been broken off.
2 Set the INPUT SELECTOR button on the
receiver to TAPE.
3 Press REC PAUSE ( @ if) and PLAY ( » or
<4).
3
25
<ARB1293>
En
Advertisement
Table of Contents
