Brewing Milk-Based Drinks; Brewing Coffee With Pre-Ground Coffee; Dispensing Hot Water - KitchenAid 5KES8556A Owner's Manual

BREWING MILK-BASED DRINKS

1.
Fill the Water Tank with tap water and fill the Bean Hopper with beans. Remove the Lid of
the Milk Container and fill the Milk Container with milk. Always use milk coming directly
from the fridge for optimal results.
2. Models 5KES8557A and 5KES8558A only: Connect one side of Milk Hose to the milk
container lid, connect the other side of the Milk Hose to the side of the Dispenser. Press
the " " icon and select your coffee.
NOTE: Model 5KES8556A, does not include a Milk Container. To brew milk based drinks,
remove the Milk Hose connector piece from one end of the Milk Hose, place hose end directly
in the container of your choice. See "Model 5KES8556A Milk Brewing and Cleaning" section.
3.
You can adjust the settings to your preference by pressing the " " icon. Press the " " icon
at any time to start brewing the selected drink.
4.
Directly after dispensing the milk, the "Easy Milk Rinsing" is performed. The machine
forces steam through the internal milk system to rinse it quickly.

BREWING COFFEE WITH PRE-GROUND COFFEE

1.
Remove top Lid. Open Coffee Grounds Shaft (underneath the cover on the upper right of
the machine), the Display shows Fill Coffee Grounds Shaft and Close grounds shaft.
2.
Add a level Spoon of ground coffee. Close Coffee Grounds Shaft and Lid. The Display
shows when the ground coffee is ready.
3.
Place a cup in the middle below the Dispenser. Select the beverage from the options
available on the screen. The machine will then begin to brew.
NOTE: When using "Coffee Grounds" mode, the shots cannot be adjusted.

DISPENSING HOT WATER

1.
Press the " " icon to enter the Drinks menu and select "Hot Water" by pressing the " "
icon.
2.
Press the " " icon to start dispensing hot water.
PERSONALISING DRINKS AND CREATING PROFILES
Within the drinks menu, the factory recipe settings can be changed individually and stored
indefinitely. The machine allows you to adjust the settings of a drink to your own preference
and to save the adjusted drink in a personal profile. There are two ways to create a profile:
1.
Personalising your drinks:
� Press the " " icon.
� Press the " " icon to select your preferred drink.
� After selecting a drink, you can see next screen for more settings to adjust.
� Use the " " or " " icon to navigate different selection buttons depending on the type of
drink to adjust strength, volume of coffee, milk and foam, temperature, the taste and
the order of brewing milk-based drinks to your preferred level.
� You can save these settings to your profile by selecting the " +" icon on the screen and
confirm it by pressing " " icon or press " " icon to brew the personalized drink.
2.
Creating a profile:
� Press the " " icon.
� Select "Add profile".
� Enter a name for the new profile and click on "Add New".
� Select the newly created profile.
� Add drinks to the profile by selecting "Add Drink".
7