Panasonic Omnivision PV-7451 Operating Instructions Manual page 29

Using the Universal Remote Control
Once the remote control has been properly set up, you can select VCR, TV, or
CATV mode depending on which functions you wish to control.
VCR TV CATV
0or 0or 0
Push VCR or TV or CATV on the remote control to
select the desired mode.
(See below for the controllable functions of each mode.)
NOTE:
In TV or CATV mode, it may be necessary to push DISPLAY/ENTER
after pushing NUMBERED keys for channel selection.
VCR Mode TV Mode CATV Mode
In VCR mode, the following In TV mode, the following In CATV mode, the following buttons
buttons are available. buttons are available. are available.
VCR
All function buttons.
IV
VOL UP/DOWN
IV
POWER, INPUT, NUMBERED keys,
DISPLAY/ENTER/,
CH UP/DOWN, VOL UP/DOWN
VCR
VCR/TV, PLAY, STOP, FF, REW,
PAUSE, SLOW, REC, SAP/Hi-Fi,
SPEED, COUNTER RESET,
ZERO/1 MIN.
CATV
POWER, NUMBERED keys,
DISPLAY/ENTER, CH UP/DOWN
VOL UP/DOWN
VCR
VCR/TV, PLAY, STOP, FF, REW, PAUSE,
SLOW, REC, SAP/Hi-Fi, SPEED,
COUNTER RESET, ZERO/1 MIN.
• Some TV and Cable Box brands require you to turn on the power manually.
• Not ail functions listed may be controlled by this remote.
29