Table of Contents
Advertisement
Basic operation
-
Input
B)ock - You can block the input source with this function.
For example,
if you want to block AV
input, just Hghlight
[AV] and press [ENTER].
The AV input will not be seen in the screen.
°
Change
Password
- The first time you use this function,
use the default password_ If you want to
change it, first enter the new password then enter the same password again.
o
Clean All - This function will let you clean all the channels stored on this T_,_
Note:
If you choose this function,
all the programs you preset will be lost.
settings
1. Press MENU to open the OSD option
2. Press A or Y to highlight TV, then press _ to enter the TV menu.
3_
Press A or V to highlight an option, then press 4 or _ to adjust the option, You can
adjust:
o Tuner
Mode - Select the TV signal source. You can select Antenna
or Cable.
o Channel
Scan - Scans for channels that have signals and stores the channels information
in memory.
When you press 4 or _, your TV skips any channels that do not have a signal.
o Channel
Skip
- Deletes a channel stored in memory. When you press CH+ or CH-, your TV skips the
channel you deleted. You can still tune to the channel using the number buttons on the remote control.
o
MT$ - Selects the sound mode. You can select Mono, Stereo, or SAP (second audio program).
o Audio
LanguageoSelects
the audio language for a program.
Cleaning
and care
WARNING:
Do not try to remove the cabinet from the back. Refer servicing to qualified service technicians.
To clean
the
TV screen:
:L Unplug the TV to avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth dampened
with a solution of mild detergent
and warm water
to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet
can cause
damage to the Tv'.
3. Wipe off any excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture
polish to maintain the finish and appearance of the cabinet.
Caution:
Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
2O
Advertisement
Table of Contents
