Sony STR-DE475 Operating Instructions Manual page 8

Digital Component Hookups
z
o
o
C
"0
0
3
"o
o
Connect the digital output jacks of your DVD player and
satellite tuner (etc.) to the receiver's digital input jacks to
bring the multi channel surround sound of a movie
theater into your home. To enjoy full effect of multi
channel surround sound, five speakers (two front
speakers, two surround speakers, and a center speaker)
and a sub woofer are required. You can also connect an
LD player with an RF OUT jack via an RF demodulator,
such as the Sony MOD-RF1 (not supplied).
TV or Satellite DVD player
tuner (etc.)
Optical digital cords (not supplied)
Black _=, ,_ Black
Coaxial digital cord (not supplied)
Yellow _ _ Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color coded pins to
the appropriate jacks on the components.
217,1Z7o e,,ow ,v,Oeo
) White (L/audio)
Red (R/audio) Red (R/audio)
Notes
• The optical and coaxial digital input jacks on the receiver are
compatible with sampling frequencies of 32 kHz, 44.1 kHz, and
48kHz.
• The coaxial digital input jack is also compatible with sampling
frequency of 96 kHz.
lii_ilil _ i_-_ .,==,,:,..=.1=,_,,
Please note that you cannot connect an LD player's AC-3 RF OUT jack directly to the receiver's digital input jacks. You
must first convert the RF signal to coaxial digital signal. Connect the LD player to the RF demodulator, then connect the RF
demodulator's coaxial digital output to the receiver's COAXIAL DVD/LD IN jack. Refer to the instruction manual
supplied with your RF Demodulator for details on AC-3 RF hookups.
VIDEO OUT
LD player
AC-3 RF
OUT
RF demodulator
DIGITAL [
DVD/LD IN
(COAXIAL)
DVD/LD
VIDEO IN
Note
When making connections as shown above, be sure to set INPUT MODE ([_ on page 23) manually. The receiver may not operate correctly
if INPUT MODE is set to "AUTO."
8