Sony STR-DE475 Operating Instructions Manual page 17

Hide thumbs Also See for STR-DE475:
Table of Contents

Advertisement

• Surround
speaker
height
({_} _)*
Initial setting
: HGT. LOW
This parameter
lets you specily the height of your
surround
speakers
lor proper implementation
of the
Digital Cinema Sound surround
modes in the
"VIRTUAL"
sound fields. Refer to the illustration
below.
• Select "HGT. LOW" if the location of your surround
speakers
corresponds
to section O.
• Select "HGT. HIGH"
if the location of your surround
speakers
corresponds
to section O.
This setting only affects the surround
modes in the
"VIRTUAL"
sound fields.
\\\\
/
* These
parameters
are not available
when
"Surround
speaker
size"
is set to "NO".
"_" About the surround speaker position (PL. SIDE, and PL. BEHD.)
This setting
is designed
specifically
for implenmntation
of the
Digital
Cinema Sound modes
in the "VIRTUAL"
sound fields.
With the Digital
Cinema Sound modes,
speaker
position
is not as
critical as other modes. All of the modes
in the "VIRTUAL"
sound fields were designed
under
the premise
that the surround
speaker
would
be located
behind the listening
position,
but
presentation
remains
fairly consistent
even with the surround
speakers
positioned
at a rather wide angle. However,
if the
speakers
are pointing
toward
the listener
from the immediate
left
and right of the listening
position,
the "VIRTUAL"
sound fields
will not be effective unless
the surround
speaker
position
parameter
is set to "PL. SIDE".
Nevertheless,
each listening
environment
has many variables,
such as wall reflections,
and you may obtain better results
using
"PL. BEHD." if your speakers
are located high above the listening
position,
even if they are to the immediate
left and right.
Therefore,
although
it may result in a setting contrary
to the
"Surround
speaker
position"
explanation,
we recommend
that
you play back multi channel
surround
encoded
software
and
listen to the effect each setting
has on your listening
environment.
Choose the setting that provides
a good sense of spaciousness
and that best succeeds
in forming
a cohesive
space between
the
surround
sound from the surround
speakers
and the sound from
the front speakers.
If you are not sure which sounds
best, select
"PL. BEHD." and then use the speaker
distance
parameter
and
speaker
level adjustments
to obtain proper
balance.
• Sub woofer
selection
Initial setting : S.W. YES
• If you connect a sub woofer, select "S.W. YES".
• If you do not connect a sub woofer, select "S.W. NO".
This activates
the bass redirection
circuitry
and outputs
the LFE signals from other speakers.
• In order to take ftfll advantage
of the Dolby Digital
(AC-3) bass redirection
circuitry, we recommend
setting
the sub woofer's
cut off frequency
as high as possible.
• Front speaker
distance
({@_ _})
Initial setting : DIST. 5.0 m (5.0 meter) 16 feet
Set the distance
from your listening
position to the front
(left or right) speaker
(O on page 15).
• Front speaker
distance
can be set in 1 loot (0.1 meter)
steps from 3 to 40 feet (1.0 to 12.0 meters).
• If both speakers
are not placed an equal distance
from
your listening
position,
set the distance to the closest
speaker.
• Center speaker distance ( {_ )
Initial setting : DIST. 5.0 m (5.0 meter) 16 feet
Set the distance from your listening position to the center
speaker.
• Center speaker distance can be set in 1loot (0.1 meter)
steps from a distance equal to the front speaker distance
(O on page 15) to a distance 5 feet (1.5 meters) closer to
your listening position (O on page 15).
• Do not place the center speaker farther away from your
listening position than the front speakers.
Surround
speaker
distance
({_
{_)
Initial
setting
: DIST. 3.5 m (3.5 meter)
11 feet
Set the distance
from
your
listening
position
to the
surround
(left or right)
speaker.
• Surround
speaker
distance
can be set in 1 loot
(0.1
meter)
steps
from
a distance
equal
to the front
speaker
distance
(_
on page
15) to a distance
15 feet
(4.5 meters)
closer
to your
listening
position
(_
on page
15).
• Do not place
the surround
speakers
farther
away
from
your
listening
position
than
the front
speakers.
• If both
speakers
are not placed
an equal
distance
from
your
listening
position,
set the
distance
to the
closest
speaker.
I
3_
0
0
5'
c
D.
o
5'
c
o
o
3
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-k402

Table of Contents