Eizo FlexScan EV2760-WT User Manual page 22

Function
Input Color Format
Input Range
Sound Source
*1 Only enabled during HDMI input
*2 Only valid for DisplayPort input
*3 Only available for HDMI input with an audio signal
22
Chapter 3 Advanced Adjustment / Setting
Setting Value
Auto The color format of the input signal can be specified.
YUV 4:2:2 *1 Try changing this setting if colors are not displayed correctly.
*1
YUV 4:4:4
Note
*2
YUV
• This setting is required when a DVI device is connected to
RGB
the monitor via the HDMI connector port using a DVI-HDMI
conversion connector.
• For DVI signal input, the setting is automatically set to
"RGB".
Auto Depending on the video reproduction device, there may be a
Full restriction on black and white video signal levels output to the
Limited monitor. This kind of signal is called "Limited range". On the
other hand, unlimited signals are called "Full range".
• "Auto"
Input signal brightness range is automatically judged and is
displayed appropriately (recommended setting). Depending
on the video reproduction device, Limited range and Full
range may not be able to be judged by the monitor. In
such a case, selecting "Full" or "Limited" will allow it to be
displayed appropriately.
• "Full"
To be selected in case of Full range signals. Appropriate
display can be obtained when this is selected, in case both
blacks and whites are corrupted.
• "Limited"
To be selected in case of Limited range signals. In case this
is selected, the output signal range is expanded from 0 to
255 to obtain an appropriate display when black is pale and
white is dull.
Note
• For DVI signal input, the setting is automatically set to "Full".
• When "YUV" is selected in "Input Color Format", the setting
is automatically set to "Limited". Additionally, when "Auto" is
selected and the monitor determines the input color format
to be YUV, the setting is automatically set to "Limited".
Stereo Mini Jack For DisplayPort signal input and HDMI signal input, the sound
*2
DisplayPort source can be changed.
*3
HDMI
Note
• For DVI signal input and HDMI signal input without an audio
signal, the setting is automatically set to "Stereo Mini Jack".
Description