Table of Contents
Advertisement
Wiring
3.
Wiring
Figure 6 shows the connection of cables on rear of display unit.
Figure 6 Connection of cables on display unit
1.
Grounding
The display unit contains several CPUs. While they are operating,
they radiate noise, which can interfere with other radio equipment.
Ground the unit as follows to prevent it.
• The grounding wire should be 1.25sq or larger.
• The grounding wire should be as short as possible.
• Connect the grounding wire to ship's ground by silver-alloy
brazing.
2.
External Equipment
The DATA IN/OUT port and D. GPS port are used to connect an
external equipment such as autopilot, remote display, navigation
equipment, DGPS beacon receiver. The interconnection cable is
optionally available as shown in the table of page 14.
6
Advertisement
Table of Contents
