General Problems With The Washing Machine - Miele PWM 514 Operating And Installation Instructions

Commercial washing machine
Hide thumbs Also See for PWM 514:
Table of Contents

Advertisement

Problem solving guide

General problems with the washing machine

Problem
The washing machine vi-
brates during the spin
cycle.
Large amounts of detergent
residue remain in the deter-
gent drawer.
Fabric conditioner is not
completely dispensed or
too much water remains in
the  compartment.
The display is in a different
language.
The door will not open.
38
Cause and remedy
The machine feet are not level and not secured.
Level the washing machine and secure the feet.
The water flow pressure is too low.
Clean the water inlet filters.
When powder detergent is used in conjunction with water
softeners it tends to become sticky.
Clean the detergent drawer and in future, add detergent
first and then the water softener into the compartment.
The siphon is not correctly positioned or is clogged.
Clean the siphon (see "Cleaning and care – Cleaning the
detergent drawer").
A different language has been selected in "Settings "
"Language ".
Set the language you want. The flag symbol serves as a
guide.
There is no power to the machine.
Check whether the machine is switched on.
Check whether the machine is connected to the power
supply.
Check whether the main fuse or circuit breaker has
tripped.
Power failure
Open the drum door as described in the next section.
There is still water in the drum and the machine is unable
to drain.
Check whether the drainage system is blocked. Clean
the drainage system as described in the next section.
For safety reasons the drum door cannot be opened if the
suds temperature is higher than 50 °C.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pwm 520

Table of Contents