Remote Control Function And Using It - Grundig GDP584427W User Manual

6.20.3 Remote Control Function and
Using It
After HomeWhiz setup, bluetooth will auto-
matically turn on. To activate or deactivate
the Bluetooth connection, please see
"Bluetooth 3".
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device go-
ing off the range, bluetooth will automatic-
ally turn off. For this reason, you will need
to turn on the bluetooth again if you want to
use the Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If
the symbol is continuously on, you have
bluetooth connection. If the symbol is
flashing, the product is trying to connect. If
the symbol is off, you have no connection.
WARNING
If the Bluetooth connection is
turned on in your product, then the
Remote Control function can be se-
lected.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection can-
not be established, repeat the initial
setup steps over the product.
For safety reasons, the product
door will be locked and remain
locked regardless of the operating
mode of the product when the Re-
mote Control function is activated.
If you want to open the door of the
product, you will need to turn the
programme selection knob or press
the remote control key to deactiv-
ate the remote control function.
When you want to control your washing
machine remotely, after the front lid is
closed, you need to activate the Remote
Control function by pressing the Remote
Control button while the programme knob
is in the Download Programme/Remote
Control position button on the control panel
of your washing machine. Once access is
established to the product, you will see a
screen similar to the one below.
When the Remote Control is enabled, you
can only manage the machine, turn it off
and follow the status through your washing
machine. And all functions except child
lock can be managed through the applica-
tion.
You can follow whether the Remote Control
function is On or Off through the function
indicator on the button.
If the Remote Control function is Off, all the
operations are handled on the washing ma-
chine and only status follow-up is allowed
on the application.
In the event that Remote Start function can-
not be turned on, appliance will make a
warning sound when you press the button.
This might happen in cases such as when
the appliance is turned on and there is no
paired smart device via bluetooth.
Bluetooth settings being Off or the washing
machine's door being open are examples
for such cases.
Once you activate this function on the
washing machine, it will remain enabled
apart from certain conditions and allow you
to control your washing machine remotely
via bluetooth.
In certain cases, it deactivates itself for
safety reasons:
• When your washing machine undergoes
a power interruption.
• When programme knob is turned and a
different programme selected or appli-
ance is turned off.
EN / 44