Table of Contents
Advertisement
Quick Links
ETHX-DS3-1-LT and ETHX-DS3-2-LT
DS3 EtherXtend Access Device Installation Instructions
Document Number ETH3-A2-ZN10-00
May 2007
Contents
Software and Firmware License Agreement ..................................................... 2
Introduction to ETHX-DS3-1-LT and ETHX-DS3-2-LT...................................... 4
Package Contents ............................................................................................. 5
Release Notes ................................................................................................... 5
Powering Up the Network Extender .................................................................. 6
Connecting the DS3 Lines................................................................................. 8
Connecting the Ethernet Lines .......................................................................... 9
LED Indicators ................................................................................................. 10
Web Interface .................................................................................................. 12
Command Line Interface ................................................................................. 17
Resetting the Network Extender to Factory Defaults ...................................... 19
Specifications .................................................................................................. 22
EMI Notices ..................................................................................................... 23
NEBS Compliance........................................................................................... 23
Service and Repair .......................................................................................... 24
Important Safety Instructions........................................................................... 25
Product Documentation Online ....................................................................... 26
1
Advertisement
Table of Contents
Related Manuals for Zhone ETHX-DS3-1-LT
Summary of Contents for Zhone ETHX-DS3-1-LT
-
Page 1: Table Of Contents
DS3 EtherXtend Access Device Installation Instructions Document Number ETH3-A2-ZN10-00 May 2007 Contents Software and Firmware License Agreement ... 2 Introduction to ETHX-DS3-1-LT and ETHX-DS3-2-LT... 4 Package Contents ... 5 Release Notes ... 5 Powering Up the Network Extender ... 6 Connecting the DS3 Lines... 8 Connecting the Ethernet Lines ... -
Page 2: Software And Firmware License Agreement
Zhone or its authorized distributor or reseller under the following terms and conditions: 1. Ownership: The Software is the sole property of Zhone and/or its licensors. The Licensee acquires no title, right or interest in the Software other than the license granted under this Agreement. - Page 3 5. Except for the Product warranty contained in the manual, the Software is provided “AS IS” and in its present state and condition and Zhone makes no other warranty whatsoever with respect to the Product purchased by you. THIS AGREEMENT...
-
Page 4: Introduction To Ethx-Ds3-1-Lt And Ethx-Ds3-2-Lt
45 Mbps (ETHX-DS3-1-LT) or 90Mbps (ETHX-DS3-2-LT) of symmetrical bandwidth using DS3 lines for transport. The ETHX-DS3-1-LT features one DS3 port, and the ETHX-DS3-2-LT has two DS3 ports, each capable of up to 45 Mbps bandwidth. One or two ports may be used to deliver Ethernet connections over DS3 facilities of any given length. -
Page 5: Package Contents
Contact your sales or service provider. Release Notes Before installing your network extender, review the release notes for your model. These are available on the “Service and Support” page under the documentation heading at the Zhone website. http://www.zhone.com/support/manuals/net_ext_manuals#rnotes... -
Page 6: Powering Up The Network Extender
Powering Up the Network Extender The DC power terminal block on the network extender has five terminals: two positive, two negative, and one with no connection. Only one positive terminal and one negative terminal pair need be connected for operational purposes. The second positive and negative terminal pair may be connected to a backup DC power supply for redundancy. - Page 7 Power Connection – AC Power 1. The AC power supply is shipped with the power terminal strip already attached. No AC power supply other than the one supplied with the ETHX-DS3-x-LT is approved for use in powering the unit. Using any other AC power supply could cause the unit to be non-compliant to emissions and safety regulations.
-
Page 8: Connecting The Ds3 Lines
Two DS3 lines also act as a backup should one of the lines become disabled. A network extender can only establish loop bonded connections with other Zhone equipment with the loop bonding feature. -
Page 9: Connecting The Ethernet Lines
2. Verify all connections: the DS3 LINK/ALARM LEDs on the front of the network extender will pulse green to indicate the connections are established and operational. Single DS3 Connection A single line connection can be established between a single port subscriber unit and either a single port or dual port ETHX-DS3-x-LT provider unit. -
Page 10: Led Indicators
LED Indicators Table 2. LEDs (1 of 2) State 10/100 Pulsing Ethernet Green Connections Solid LINK/ACT Green Illuminated 10/100 Solid Ethernet Amber Connections Duplex/ Illuminated Collision Pulsing Amber 10/100 Solid Ethernet Green Connections Illuminated Indication Standard operation Ethernet connection is established No Ethernet connection Full duplex Ethernet... - Page 11 Table 2. LEDs (2 of 2) State Flashing Connections Green* LINK/ACT Solid Green (Ports 1 or 1&2) Solid Amber Pulsing Amber Flashing Connections Amber Tx (Ports 1 or 1&2) Illuminated Flashing Connections Amber Rx (Ports 1 or 1&2)) Illuminated Power Solid Green * A pulsing LED blinks steadily at a rate of once per second.
-
Page 12: Web Interface
Web Interface The network extender’s integral web management lets you configure and monitor the network extender using a standard web browser. To manage a Provider unit using web management, connect your PC to any Ethernet port of the Provider unit. By default, the Subscriber unit can be managed by the web management through its Ethernet ports. - Page 13 Web Interface System Requirements Web Browser – Required for running web management. Compatible web browsers include, but are not limited to, Microsoft Internet Explorer (v4.0 or higher) and Netscape Navigator (v4.0 or higher). web management is optimized for use with Internet Explorer. Use your browser's default settings when running web management.
- Page 14 192.168.254.251 (for a subscriber unit) into the Address field and press Enter. The web server opening screen appears. 10. Click on >> Next >>. The login dialog box appears. Log in using: Username: Password: The web management home page appears. superuser Note –...
- Page 15 From this screen you can: Click on . . . Management Config. Advanced Config. HTTP Password SNMP Config. SNMP Community Pro/Sub Cfg IGMP Srvr Password Time-out Set DSLAM Users Show Help Refresh Screen Ethernet Connections Lnk/Act LEDs DS3 Connections Lnk/Alm LEDs To configure .
- Page 16 Configure Provider or Subscriber Mode web management To reconfigure a unit from provider to subscriber mode, open the home page as described above. Observe the designation displayed on the center right side of graphical view of the front of the unit. It will display either the word “Provider” or “Subscriber”...
-
Page 17: Command Line Interface
Command Line Interface The network extender can be managed with a Command Line Interface (CLI) through either a direct PC to COM (Communication) Port connection or from a remote network connection via Telnet. CLI System Requirements Straight-Through 8-Pin Modular Ethernet Cable – Required for establishing a direct connection from the COM port to a DB9 adapter. -
Page 18: Logging Into The Cli
Logging Into the CLI Once your terminal emulation program has been launched, device information is displayed, followed by a request for username and password. You must log in as a superuser in order to make configuration changes. Username: Password: Using the CLI to Establish In band Management Option 1: After you have logged in, enter a question mark (?) to list the available commands. -
Page 19: Resetting The Network Extender To Factory Defaults
Resetting the Network Extender to Factory Defaults The network extender supports a reset process that may be used to delete the current configuration and return it to the factory defaults, including the default password. Procedure To return the network extender to its factory default configuration: 1. -
Page 20: Connector Pin Assignments
Connector Pin Assignments Ethernet Pin Assignments Table 3. Ethernet Pin Assignments Function Pin 1 Pin 2 Rx– Pin 3 Pin 4 not used Pin 5 not used Pin 6 Tx– Pin 7 not used Pin 8 not used... - Page 21 DB9 to 8-Pin Modular Adapter Pin Assignments To connect the COM port to the DB9 serial port of a PC, use an adapter wired as shown: Table 4. DB9 to 8-Pin Modular Adapter Pinouts 8-Pin Modular Port Transmit Data Data Set Ready Receive Data Ground Data Terminal Ready...
-
Page 22: Specifications
ETHX-DS3-2-LT: Up to 89.4 Mbps using loop bonded DS3 circuits Dimensions 1.25" (3.2 cm) High x 8.5" (21.6 cm) Wide x 4.75" (12.1 cm) Deep Interfaces ETHX-DS3-1-LT: 2 BNC 75 ohm jacks (Tx and Rx) ETHX-DS3-2-LT: 4 BNC 75 ohm jacks (2-Tx and 2-Rx) 4 10/100BaseT 8-position jacks Operating... -
Page 23: Emi Notices
The authority to operate this equipment is conditioned by the requirements that no modifications will be made to the equipment unless the changes or modifications are expressly approved by Zhone Technologies, Inc. If the equipment includes a ferrite choke or chokes, they must be installed per the installation instructions. -
Page 24: Service And Repair
Zhone worldwide office locations, use one of the following methods: Internet: Visit the Zhone World Wide Web site at www.Zhone.com. (Be sure to register your warranty at www.Zhone.com/warranty.) Telephone: Call our automated system to receive current information by fax or to speak with a company representative. -
Page 25: Important Safety Instructions
Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord. 3. -
Page 26: Product Documentation Online
Product Documentation Online Complete documentation for Zhone products is available at www.Zhone.com. Select Service & Support then select Documentation. To order a paper copy of a Zhone document, or to speak with a sales representative, please call (877) Zhone-20 (946-6320). - Page 27 Copyright 2007 Zhone Technologies, Inc.. Printed in U.S.A.
- Page 28 * ETH3-A2-ZN10-00*...